Electronics Forum | Thu Jun 30 18:31:28 EDT 2005 | KEN
Make sure your RS232 is screwed in and not loose. Verify your PC is not hanging up and locking up the com port (windows can really suck some times). I would scan-disk and defrag. I bet its not a furnace problem, but a PC problem.
Electronics Forum | Sun Jan 17 13:05:33 EST 2010 | smellew
Rodrigo, MCS PC Pin 1 To Pin 2 Pin 4 To Pin 5 pin 6 To Pin 3 Local Links MCS 9 Way Male Link 2 & 8, 3 & 7 PC 9 Way Female Link 7 & 1, 4,6 & 8 If you need anything else let me know Regards Llew
Electronics Forum | Thu Feb 22 12:21:14 EST 2001 | prz1
I am a new user of an old PERMAX VMP-1000. The machine is in excellent condition but I do not have the software to link the machine with a PC. However I can program it from the machine keyboard but it would be very useful to do that from my comput
Electronics Forum | Thu Dec 25 14:23:21 EST 2014 | luca2006
hi, i need download link for installation soft for samsung cp40cv , after pc replace and installation of windows xp I lost all drivers and soft , Soft vers was 6.87 New pc is commell hs 862 + passive 3 slot for isa Thanks
Electronics Forum | Fri Oct 28 13:58:57 EDT 2016 | ttheis
Hi everyone, We just picked up an old VIP70 oven and it is in need of more maintenance than we were told when we bought it so I'm working on a few issues. The main thing right now is linking the FCU controller to the PC. I've tried using both seria
Electronics Forum | Tue Feb 08 10:25:46 EST 2011 | remullis
Michelle, It's been years since I worked on these machines and mine were CS400E's. The next time this error comes up instead of powering down Unplug the RS232 cable that links between the PC and the processor board in the machine, I cant remember if
Electronics Forum | Thu Jun 15 04:12:12 EDT 2006 | Rob
I agree with Dave, we looked at it, but they can go walkies, and also people tread on them, drop things on them, mess with the programs etc. We (the IT dept, not me)ended up writing a Visual basic program & put a PC at every inspection station, li
Electronics Forum | Tue Apr 03 08:02:05 EDT 2007 | itaig1
I have the manual for this machine and the programs I am after allow me to connect the machine to a PC via an RS232 interface to allow upload and download files to/from the machine as well as an optimiser. We have had the machine for a while and is o
Electronics Forum | Thu Nov 19 11:15:13 EST 1998 | Stefan Witte
Hi Martin, I found the Amistar very easy to program and operate, but I recommend using a PC link ( PROCOMM )for data up and download. Despite the age of the machine, Amistar was extremly helpful in telephone support. We purchased some additional man
Electronics Forum | Wed Aug 24 09:20:25 EDT 2016 | dekhead
Suspect comms link error from Y3 to Y1 crate. COM 2 off of CPU, depending on board. If CPU board has RS485 port it is direct to back panel of PC; if older board it only has RS232 and thus requires 232/485 converter board (internal to PC). then direct
winsouce.jpg)
