Electronics Forum | Thu Jan 13 07:29:49 EST 2005 | Grant
Hi, It's both really, and we are doing higher volume of current products, but new products are increasing in component count, mostly passives. We have analog on our products, and this uses a lot of passives, plus each semiconductor needs decoupling
Electronics Forum | Tue May 03 21:46:13 EDT 2005 | KEN
I have 5 of these machines. What software version are you running. 24 inch frames will interfere with the USC. The solvent bar will ride on the stencil frame. This will not allow for a pre-load on the foil. 1. Adaptors suck! 2. Adaptors suck! 3
Electronics Forum | Thu Jun 29 23:39:25 EDT 2006 | grantp
Hi, Oh, never noticed this old comment, but now the threads been revived i can comment. I have actually owned three MYDATA machines over the duration of the last 6 years, and they all had accuracy problems. It depends on what your doing, but we got
Electronics Forum | Thu Jun 09 13:16:44 EDT 2005 | stepheniii
Do you have any parts dedicated on the machine? 100n 0603 or 0805 is probably used on almost everything you build. So why take it off and put it on the machine several times a day. Even if you dedicate only 20 parts to never come off the machine, tha
Electronics Forum | Wed Dec 14 12:48:21 EST 2005 | grantp
Hi, A second hand TP9-2U MYDATA could be picked up very low cost, however it will only load a single component at a time, which could be ok for your jobs. However if your running 0402, I am not sure if that model will do it accurately. Your machin
Electronics Forum | Fri Sep 22 12:55:39 EDT 2006 | Grant
Hi, I guess that's the problem, I really appreciate the forum itself, but just wonder if some things can be done to improve it, as it's been similar for years now, while the rest of the web keeps getting better and better. It's really cool to hear
Electronics Forum | Wed Jan 23 11:28:47 EST 2008 | tbkonrad
Help! Since last Friday i have been having issues with a Quad qsv-1, it all started with a quad align error, i found there to be a small quantity of grease covering the lenses on both quad align sensors. I wiped the grease off and then everything s
Electronics Forum | Wed Oct 15 15:08:05 EDT 2008 | mbrunton
I have a Fuji IP1 using the MCS control system. Everything works fine, but it seems to have tons of problems placing PLCC4 parts (Osram Power TopLED). Some reels I load up it will give a vision processing error for about 1 out of 10 parts. Other r
Electronics Forum | Tue Aug 18 17:49:16 EDT 2009 | dyoungquist
Is there a limit to how many times a pcb with components can be run through a reflow oven before the components start to degrade? Example: We load the SMT components on the bottom side of the pcb and run it through the reflow oven. Next we load the
Electronics Forum | Tue Jun 29 22:56:04 EDT 2010 | deanm
There may be a better way, but this is how we do it: We have one SMT line and ALL SMT parts are kept in the SMT area. There is no kitting of SMT parts...only through hole, etc. For each SMT part in our ERP system, we set for backflush. That means th