Electronics Forum | Wed Oct 24 11:20:50 EDT 2007 | mulder0990
Would the Teflon in the lube help or hinder the situation? I would think that it would be able to withstand some of the friction and dust issues a little better.
Electronics Forum | Tue Jul 07 03:57:46 EDT 2009 | davef
While you're waiting for others to reply, search the fine SMTnet Archives to find threads like: http://dev.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=52172
Electronics Forum | Tue Jul 14 22:08:02 EDT 2009 | magnifico
Thanks Sr. Tech! To Daxman, Do you use Alvania#2 as well (in combination with TFL-50)? Furthermore, when purchasing TFL-50 wet lube, do you normally pay for the shipment, dangerous goods packing, etc? Thanks a lot!
Electronics Forum | Tue Jul 06 18:03:52 EDT 2010 | daxman
Hi, sorry for the late reply. We use Mobil Mobilux EP2 grease for the LM blocks and TFL50 where there is bare metal. We've purchased the TFL50 online many times and only incur a shipping expense.
Electronics Forum | Tue Sep 29 13:03:01 EDT 2009 | soudomphong
Thank you for responding. I called Speedline tech support he think there is a short some where in the motor. I changed the motor out and still have the same problem. The chain is normal, and using automatic lubricating. I will check more into this, a
Electronics Forum | Tue Dec 01 18:01:17 EST 2009 | swag
I should add we use one listed lube from each recommendation and were able to find everything (although that was close to 10 yrs. ago). We bought enough to outlast the oven so we haven't had to buy any since. The oven is still going strong!
Electronics Forum | Mon May 24 19:31:55 EDT 2010 | jry74
Can anyone give me suggestions on tape used for masking. Of course, I am looking for the "perfect tape" that sticks well, is flexible, offers lubricity for rubbing the tape, does not leave adhesive, easily removed for demasking, and won't leacvh any
Electronics Forum | Fri Jan 21 11:28:39 EST 2011 | nucleartoast
I worked for Electrovert for 20 years and up till today the 1421 is still the oil of choice. The chain doesn't care who's oven it's running in but it does require regular lubrication.
Electronics Forum | Fri Jan 28 15:58:38 EST 2011 | oangulo
The issue was with the actuator 2. after we clean and lubricate it the issue disapear.. Thank you.
Electronics Forum | Tue Oct 25 15:03:48 EDT 2011 | sjs2303
Hi Bert, For your second issue, are the tools well lubricated? If not the Midas head can fail to grab the tool and can generate the z motor error. Doing this followed by a base-centre level measurement should resolve your problem. Steve
