Electronics Forum | Sun Aug 13 00:28:39 EDT 2006 | Ola
Hi, This is very interesting!!!! I work for a company that have recently (2 years back) been extremely difficult to just order such ridiculous thing as o-rings or screws or lubricants, from local vendors that are not within our companys "approved li
Electronics Forum | Sat Jan 20 23:48:55 EST 2007 | bvdb
Hi Al, Thanks for the suggestion. Yes, I should have said that the cable has been checked and another cable tested with the same results. In addition to the three wires that carry the transmit data, the receive data and the data signal ground, the
Electronics Forum | Mon Feb 12 21:38:38 EST 2007 | DEK Answer Guy (PR Dept)
Technical Papers) -ProFlow� upgrades (MPU's). -Paste Low Optimisation -Adjustment of the Print Carriage to ensure Squareness to the Stencil -Replacement of Hinge Pin Assembly -Conversion of ProFlow� to Horizontal Mount -ProFlow� Guides for Operators
Electronics Forum | Tue Mar 13 17:29:18 EDT 2007 | Oswaldo Rey
I placed a Maxim MAX16810 38 pin TQFN with a power pad ground on the bottom of the chip on a prototype board FR4 doble sided. Vias of 0.6 mm where placed underneath part, 6 vias in total. Solder was placed with an air operated syringe, land pattern w
Electronics Forum | Tue Apr 03 20:46:32 EDT 2007 | Mike Konrad
We manufacture similar equipment. I would recommend that most of the testing be performed in an automatic shut-off mode. There are potential issues with both methods, automatic shut-off and fixed time tests. In an automatic shut-off mode, the cl
Electronics Forum | Mon Oct 22 15:41:39 EDT 2007 | davef
Bruno The real question about your troop using Kester 951 wave solder flux on boards is: how is the flux applied and controlled. See, when you apply this flux with your wave solder fluxer, it is ideally applied in a metered fashion with your fluxer
Electronics Forum | Mon Nov 19 15:21:44 EST 2007 | wayne123
I was not trying to imply that you didn't know how to run these machines I was simply saying that alot of problems that people may encounter can be solved with operating them correctly, I am sorry if you took offense to this, I too have performed all
Electronics Forum | Fri Nov 30 18:27:32 EST 2007 | jmelson
This doesn't help the original poster any, but does the Quad have any sensing of what is going on in the feeder? On the pneumatic or mechanical Philips feeders, if the tape jams in the feeder for some reason, the head just keeps tapping the lever an
Electronics Forum | Mon Dec 17 09:15:57 EST 2007 | kpm135
I have personally worked with MYData, Quad, and Panasonic in the past. We are a High Mix, Low Volume CM. The plan that is in the works is to use the CP6 to place all chip components and then use our MYData TP9 or MY12 to place the rest of the compone
Electronics Forum | Wed Jan 16 14:13:42 EST 2008 | wayne123
Well I can't tell you what one is the best, But I can tell you what one we have and that I am not happy with, A.P.E is the company it is made by, we have the "chipmaster". They have several units avialable and from what I can tell they are all about
