Electronics Forum | Wed Jun 02 19:31:01 EDT 1999 | Tony
| | | Dear All, | | | | | | We are a medium sized sub contract manufacturing house, engaged in high mix, medium volume production. We are using no clean as well as Aqueous cleaning process. we are planning to buy a new wave soldering machine out o
Electronics Forum | Wed Jan 09 11:14:39 EST 2002 | stefwitt
I wished, I would get a job like that. Malta is a nice spot! With 1500 Cph you can select any machine on the market, but here are some questions. If you use a glue machine you apparently deal with mixed technology boards. If your volume is that low,
Electronics Forum | Mon Jan 12 18:40:32 EST 2004 | fastek
You don't want dedicated tooling. Make sure your machine comes with front and rear dams and plenty of side chucks and magnetic support pins. The best option for these machines is the side snugger option but it doesn't sound like your machine has that
Electronics Forum | Mon Aug 09 15:49:16 EDT 2004 | celldude
We have definitely seen money saved. There is a lot less rework after reflow. Money is also saved in overtime. for example...when we are building a first article board with many placements, it is not always possible to get the first board through the
Electronics Forum | Mon Jul 14 11:59:41 EDT 2014 | rgduval
I've primarily used MyData equipment, personally, and, optically centered devices definitely take longer than mechanically centered parts on a MyData, owing to the construction of the machine. With a fixed upward looking camera, the head has to pick
Electronics Forum | Thu Jan 04 06:29:09 EST 2007 | bT_Solutions
Thanks SWAG. I figured there must be a way to import data. I beleive right now, the SMT operators where I work are manually making the programs right on the GSM, which depending on the assembly, could take up to a full 8-hour shift (especially when t
Electronics Forum | Fri Sep 04 02:09:03 EDT 2009 | sachu_70
Hi Walter, Do you refer to a sprayfluxer operation? The problem seems to be a parameter setting issue. 1. Ensure the wide angle spray reaches PCB with optimum jet pressure. You could pass a glass plate to understand flux coverage and view Jet pressur
Electronics Forum | Mon May 16 13:40:42 EDT 2005 | michaelmcclay
Hi C.B, I have been doing some repairs on a Quad 1000 and I am getting to know it better that I want to. My comapny is located in San Jose, CA and I can offer you on site support if you are in the area. I also had an operator "update" the configura
Electronics Forum | Fri Aug 31 00:28:09 EDT 2007 | itaig1
We are currently looking at buying a vapour phase reflow batch oven. We currently use an IR convection batch oven and want to know if there is any advantage in switching over to vapour phase?. I've heard that tomb stoning is a common problem do t
Electronics Forum | Wed Mar 28 11:27:32 EDT 2007 | jmelson
Hello, I was the guy asking about doorway size for a Philips CSM84. Well, we cut the doorway using the best info we could get, and managed to get the machine inside with only a few scratches on the paint! Still no door, hopefully the fabricator wil