Electronics Forum | Wed Jan 17 03:43:11 EST 2007 | technology
how to calculate actual CPH of pick & place machines?
Electronics Forum | Tue Oct 10 15:14:43 EDT 2006 | mfoster
Hi Phil, Most parts are still available for the Quad/Samsung QSA-30, through Dynatech (in North America). It is actually a single gantry, 3 spindle machine with rated speed of 14,000 cph. As with any used machine, it could be a great deal or a not
Electronics Forum | Mon Oct 09 13:36:30 EDT 2006 | ppminc
Phil, The QSA-30 was built by Sam Sung, Sold by Quad. Single Head 2 Nozzles around 11K CPH Quad does not support the machine but I believe you can get parts direct from Sam Sung. I am not sure if they have a registration fee. The QSA used Quad made
Electronics Forum | Thu Sep 19 18:10:53 EDT 2013 | spoiltforchoice
Don't let quoted speeds affect your decision too much. Send copies of pick and place files for actual products you intend to build and ask for simulated placement rates that would be achieved. Our machine has a rated max placement rate of 15,000cph a
Electronics Forum | Thu Sep 19 15:06:39 EDT 2013 | jvadillo
We have already one desktop oven and a manual stencil printer. And we have a quite complete soldering bench with several JBC tools. We also have stock for all active elements we use. We normally relay on the PCB assembler to provide the passive comp
Electronics Forum | Sun Aug 31 16:16:37 EDT 2014 | spoiltforchoice
Andres, I think if you were to understand the process a little better you would realise the many many problems you would encounter building even very simple things using your method. Even 30 minutes watching Youtube videos of current machines might h
Electronics Forum | Wed Oct 10 12:22:08 EDT 2001 | Kevin
Cal, There are several suppliers of cover tape materials that do not require heat to activate the adhesive. 3M and Advantek are likely the leaders. There are relatively few T&R machines that can handle both heat and non-heat applications - as Chri
Electronics Forum | Tue Oct 09 22:21:54 EDT 2001 | caldon
.............and since this link originated from march of 2000 I should not expect a response
Electronics Forum | Thu Oct 11 13:37:35 EDT 2001 | Stefan
The pressure sensitive tape is used as an alternative to heat sealed cover tape. It works usually quite well and is easily applied by the taping machine, but it can create some problems in the tape feeder. In the Surftape, Cal is referring to, the c
Electronics Forum | Fri Mar 24 15:20:27 EST 2000 | Chris McDonald
I have recently purchased a Tape and reel machine from V-Tech. We are using Presure Sensitive tape and we are not geting good results. Anything bigger that a SOIC14/16 gives us trouble. The cover tape will pull off on the feeder and we will lose part
