Electronics Forum | Wed Aug 04 16:10:42 EDT 2010 | martingruber
We are facing with the Samsung CP20-CV the following problem: wenn we run production the machine stops after the second pcb. No error or system message appears. The only way to go on is go back to the iddle modus, load the program again, go to the ru
Electronics Forum | Fri Aug 13 09:35:45 EDT 2010 | clampron
Good Morning, I have run the Contact 3AVX for several years. The machine performed well for 0805 and larger components. We did have to re-calibrate frequently (bi-weekly) for fine pitch and small discretes (0603 and 0402) We had the Auto-calibration
Electronics Forum | Tue Aug 17 11:51:52 EDT 2010 | arek
Hi, I bought Philips CSM machines (CSM66-III and CSM84V-III). I need flopy disc with some files (MCH, VIS, FDR). I created MCH file but the machine send me an error message: BAD FORMAT DATA. Could anyone help me and send me correct files. Thanks
Electronics Forum | Sat Sep 18 03:45:08 EDT 2010 | vinitverma
Before reinstalling, just take a system data backup of the machine. It'll create one floppy which you will use in the form of "System Data Restore" once you have reinstalled the software. By the way, you should have 2 CDs, one titled Application Soft
Electronics Forum | Fri Aug 27 08:20:22 EDT 2010 | whitewing
I've just set up a small forum for users of the old Versatronics Pick/place machines, but also for discussion of low-end pick/place equipment, with a UK/Europe-based emphasis. URL : http://www.electricstuff.co.uk/forum
Electronics Forum | Mon Sep 20 06:29:27 EDT 2010 | darrenleebs
i have an old contact 3av pick and place machine that has started to display placement head position errors. the machine seems to start working if you switch it on and leave it for a couple of hours to warm up. has anybody had simillar issues with th
Electronics Forum | Wed Sep 29 10:13:21 EDT 2010 | sueph
The design of this machine makes it difficult to lift the pump out to clean as often as it probably should be. We are seeing dross on the solder source side of the boards. Does putting wax in the solder pot help reduce the dross? If it does help, wh
Electronics Forum | Thu Oct 07 22:32:16 EDT 2010 | jeffr
I cannot offer a manual as a PDF, however I do have printed copies that could be photocopied. To be honest.. the manuals are little help as they are very Jap-English, anyway the Yamaha/Philips 66 is a simple machine that requires no real program trai
Electronics Forum | Wed Nov 10 02:33:49 EST 2010 | tagge
Got it starting at least.. it was the PCB stopper valve that needed some oil. Now Im stuck on trying to program, it complains about nozzles. It seems that it dosnt recognize it or its not initilazed right. I also cant get it to pick up a nozzle with
Electronics Forum | Thu Feb 17 08:56:13 EST 2011 | zavalko
Hi! Our company is Fuji's distributor in Russia. AIMEX couldn't be much faster than NXT2. There are four heads limit in the AIMEX while NXT can have dozens of modules & heads in single machine. It's hard to get a field data on AIMEX. Machine was re
Buyer, Seller, Broker of Electronic Assembly Equipment
Equipment Dealer / Broker / Auctions
309 West Pickle Alley
Rushford, MN USA
Phone: 507-864-7477