Electronics Forum | Tue Sep 02 18:49:05 EDT 2008 | jlawson
Juki machines generally are great machines for reliablity and maintaining overall accuracy as they have full linear (mag-scales) encoders on XY axis and self calibration features. Laser centering has its pros and cons - mostly pros, but can have iss
Electronics Forum | Fri Dec 12 22:41:27 EST 2008 | split63
I'm looking to purchase a used pick and place machine. A machine like the Samsung CP20 or CP45 is about right. I don't know what the equivalent machine is with the other major vendors such as, Fuji, General, Philips, etc. In general this would be
Electronics Forum | Thu Feb 18 18:25:33 EST 2010 | tony_d
Hello Bryan, My recommendation is MIRTEC by far. We checked out several machines and narrowed the selection down to two, YESTech and MIRTEC. We had an opportunity to work with both of these machines on our production floor. We found that the MIRTE
Electronics Forum | Thu Jan 13 10:40:38 EST 2011 | tony_d
Good Day Michelle, If you are looking for a solid AOI system that is simple to program and extremely accurate my recommendation is MIRTEC by far. We checked out several machines and narrowed the selection down to two, YESTech and MIRTEC. We had an
Electronics Forum | Fri Jan 28 19:24:15 EST 2011 | jlawson
Should contact Rehm Thermal they have a whitepaper on pros and cons of Vapor Phase vs Convection.... Vapor phase traditionally targeted heavy PCB, large mass products better then lighter ones, due to ramp rate control being harder to attain vs say a
Electronics Forum | Tue Aug 23 13:50:46 EDT 2011 | cyber_wolf
The time it takes to PM a CP643 is really dependent on how much you run the machine. If you are running 3 shifts obviously the machine will require more attention than one shift. You are probably not going to want to hear this, but it does take a su
Electronics Forum | Mon Dec 05 09:04:25 EST 2011 | haiae
I just buy a used Contact 3AV machine. Afer fixed some things I think the machine can be ready to run and in fact for first time the machine power up, pass all self testing, homing is done, moving of table, heads, actuator is good, pneumatic function
Electronics Forum | Sun Mar 04 02:21:40 EST 2012 | eadthem
Most PNP machines and AOI machines shuld have a X out feature. For us we use to use whiteout pens to mark the badsense spot. Now atm we use white lables, becuase there is no dry time. The lables have there own issues, They cause overpasteing issues
Electronics Forum | Mon Apr 01 09:30:41 EDT 2013 | dontfeedphils
Thanks for the reply, this is something that I am actually still fighting. I've been working with MPM directly since we ended up getting a service agreement, but I'm honestly not much closer to figuring it out today then I was when I first posted th
Electronics Forum | Sun Sep 29 01:28:42 EDT 2013 | tonnyneoden
This is Tonny from China ,I am a salesman at NEODEN TECH CO.,LTD . We are a factory specializing in the manufacture and export of desktop automatic PICK AND PLACE MACHINE (SMT MACHINE) for more than four years. We are the leaders in this technology i
Buyer, Seller, Broker of Electronic Assembly Equipment
Equipment Dealer / Broker / Auctions
309 West Pickle Alley
Rushford, MN USA
Phone: 507-864-7477