Electronics Forum | Mon Jun 18 01:56:38 EDT 2018 | reckless
PCBSynergy helped me on my 760 especially latest version with Kicad compatibility. It is pretty user friendly and almost self explanatory. Don't forget to leave files names short for the 750.
Electronics Forum | Fri Jun 15 12:07:13 EDT 2018 | fern
My company is hooking up a delta max wave solder machine but we can seem to get the estop error to go away any one have a any experience with this issue.
Electronics Forum | Wed Jun 27 09:02:51 EDT 2018 | jdengler
A CP IV-3 is able to place 0402's very well. We do it all of the time with a CP IV-2. You need the right nozzles and feeders but no problem. I agree the ProSMT software is a pain but that's not the machine's fault. Jerry
Electronics Forum | Wed Jul 04 03:59:10 EDT 2018 | oxygensmd
I had similar problem before. I cleaned the PCs (both machine and station) and replaced the cooling paste on the CPU cooler. After time the Control was able to shut off - before the issue solved, we used the safety knob to cut the Control.
Electronics Forum | Fri Jul 27 03:45:33 EDT 2018 | robl
CP643 does place 0201s. CP6 was limited to 0402. At the turn of the millenium most 0201's were being placed by Fuji's or Pana's.
Electronics Forum | Fri Jul 27 03:57:55 EDT 2018 | robl
Just found my notebook from the late 90's, 643 confirmed 0201 from the factory, 642 needed the upgraded camera from the 643.
Electronics Forum | Tue Jul 31 17:24:33 EDT 2018 | erici
There is a hardware dongle at the back of the machine. Is this the hardware link (key) you are referring to? Ok i will check the cables to PCIB40#3. Thanks again
Electronics Forum | Thu Aug 02 16:47:37 EDT 2018 | erici
Thanks for all your help guys. The problem ended up with the parallel port where the hardware key(dongle) was attached. The cabling from the pc to the parallel port at the back of the machine was defective. Cheers
Electronics Forum | Tue Aug 14 08:12:03 EDT 2018 | buckcho
Hello, Mr. Evtimov is correct. Always use data from stencil. All new SPI machines are pretty easy to operate with. You load stencil data, add you CAD data and then adjust your tolerances accordingly.
Electronics Forum | Thu Mar 07 10:32:20 EST 2019 | buckcho
Hello, what do you mean by using? Machine or what kind of file? Btw if you have simple panels(boards) you can easily make your own cad data.
.jpg)
Buyer, Seller, Broker of Electronic Assembly Equipment
Equipment Dealer / Broker / Auctions
309 West Pickle Alley
Rushford, MN USA
Phone: 507-864-7477
