Electronics Forum | Mon Sep 09 10:15:29 EDT 2019 | oxygensmd
Hello Everybody, I have a Siplace S20 machine which make X axis counting error. I replaced the sensor, scale and all the parts are good. It seems to be measuring error because the machine do measing error if the X axe move to much. Do somebody have
Electronics Forum | Fri Oct 11 09:49:07 EDT 2019 | ttheis
FYI I did try logicomm but the log files were empty. There must be something wrong with my connections from the force board to the EPC. I'll keep investigating. I also swapped the EPC to see if that makes any difference.
Electronics Forum | Thu Oct 03 12:34:42 EDT 2019 | tey422
The reason I ask for datasheet is to make sure indeed the LED is to be mounted on the side. In this case, you can still try to use the laser, component type chooses "other", component shape chooses "flexible" or "flexible 2". Try "flexible" first as
Electronics Forum | Thu Oct 10 05:22:07 EDT 2019 | spoiltforchoice
well if the issues are consistently in the same kinds of places, that at least makes it more likely a human wil spot them reasonably consistently. If they are not consistent and easily documented, people will not spot them and the time spent trying t
Electronics Forum | Sat Oct 19 03:59:13 EDT 2019 | robl
1) take the data from the pick & place machine - should be held in there somewhere in a file you could poll at certain times. 2) Barcode scannner reading the codes and storing them in a spreadsheet with time stamp 3) Take from the oven host PC if i
Electronics Forum | Mon Nov 11 21:44:06 EST 2019 | kylehunter
> Knead pressure, is normally at or slightly lower > (maybe 25%) than print pressure... Ahh makes sense. Couple other quick questions if you don't mind: 1) Currently do kneading after 15 mins of no activity, with 3 knead passes, is that n
Electronics Forum | Thu Nov 07 21:28:31 EST 2019 | sssamw
The connector is so long, and has big metal parts, it will be little deformed during reflow I guess, andthe pins planarity should be critical for 200 pins. Did you measure the non wetting pins profile to see if temperature ok? And maybe you can try u
Electronics Forum | Thu Dec 05 13:08:26 EST 2019 | thunder
I don't even know if it's a transformer,I think someone earlier said it was. I have a magnifying glass coming in addition to solder kit. Hopefully it will make the job a little easier, if i screw up I have a part on order. Do you see what I'm talk
Electronics Forum | Mon Jan 06 11:51:04 EST 2020 | stephendo
It is not all of the product. It is per separable homogeneous material. A 0402 coil could be broken into at least a half dozen pieces and each piece is separate. Look at the size of a single 0402 joint. How much lead would 0.1% be? Not much. A custom
Electronics Forum | Fri Dec 20 02:27:27 EST 2019 | spoiltforchoice
Well yes except it's marked M1 on the PCB, suggesting it's exactly what it looks like, a metal oxide varistor or 'MOV' specifically one rated to 130VAC making the board itself an AC product that takes 110V input. To replace, find any 130v varistor o