Electronics Forum | Thu Sep 16 21:28:44 EDT 1999 | JAX
| I have a number of hopefully easy questions: | | 1. Are there significant differences in the ease of change-overs and set-up among different equipment manufacturers? For example, are Siemens Siplace machines truly more modular than others?
Electronics Forum | Fri Sep 17 15:51:07 EDT 1999 | JohnW
| | | I am not familiar with the "mil" metric. How many inches is in 1 mil? | | | | | | ...or 10 mil? | | | | | | | | 1 mil= .001 inches | | 10 mil= .010 inches | | Also, it has nothing to do with metric. | | | I was also confused with this sta
Electronics Forum | Thu Sep 09 09:13:10 EDT 1999 | Scott Cook
| hi, i m college student. i m currently doing my Final year project in PCB drilling. the main task is to design auto feeder which allign the PCB properly in position before drilling take place. the close tolerance becomes a big problem to the precis
Electronics Forum | Thu Sep 02 16:06:33 EDT 1999 | Earl Moon
| Has anyone done or seen any studies done documenting what may be the affect of hardware such as screws in the parimeter vicinity of BGAs on a circuit board? | | What I'm really after is anything describing how close a screw/washer/nut combination
Electronics Forum | Thu Sep 02 16:37:23 EDT 1999 | R Scheller
| | Has anyone done or seen any studies done documenting what may be the affect of hardware such as screws in the parimeter vicinity of BGAs on a circuit board? | | | | What I'm really after is anything describing how close a screw/washer/nut combin
Electronics Forum | Tue Aug 24 05:11:32 EDT 1999 | George Verboven
| | Hello everyone, | | We found many cylindrical diodes missing during SMT process. Could someone tell us how to prevent this problem? Is it effective to change the shape of stencil apture or reduce fan speed in reflow oven? Thanks in advance. | |
Electronics Forum | Tue Aug 03 13:03:20 EDT 1999 | Dave F
| | I have been asked to supply a maximum shelf life for our assemblied PCB's. I realise this is dependent on so many factors- temperature, humidity, no of layers etc. But does anyone have a formulae for calculating shelf life, or does anyone know of
Electronics Forum | Tue Aug 03 13:03:48 EDT 1999 | Dave F
| | I have been asked to supply a maximum shelf life for our assemblied PCB's. I realise this is dependent on so many factors- temperature, humidity, no of layers etc. But does anyone have a formulae for calculating shelf life, or does anyone know of
Electronics Forum | Fri Jul 23 13:34:07 EDT 1999 | Scott McKee
| There is a practise within the industry of an Inspector inspecting a board, and that same Inspector performing touch-up. My opinion is that the Inspection and Touch-up operations should be separate functions whereby the Inspector is not performing
Electronics Forum | Fri Jul 23 14:17:55 EDT 1999 | Steve Schrader
| | There is a practise within the industry of an Inspector inspecting a board, and that same Inspector performing touch-up. My opinion is that the Inspection and Touch-up operations should be separate functions whereby the Inspector is not performin
