Electronics Forum | Thu Dec 25 02:44:53 EST 2003 | Grant Petty
Hi, Thanks for the advice, and what models are you running. They have a few different models Horizon, etc, and I am trying to work out what would be best for us. I need accuracy, and reasonable speed, but also want to get the inspection options, as
Electronics Forum | Wed Nov 03 14:46:29 EST 2004 | dramos1
Hi Russ, Thanks for the reply. In IPC-A-610 Rev. C on section 5.2.9 {Mounting - Connectors] page 5-21 on the manual [January 2000], the acceptable class [1,2,3]listed 3 items. In order for the connector to be accepted, are all 3 items must be met? I
Electronics Forum | Fri Apr 08 08:35:44 EDT 2005 | Grant
Hi, What are you doing for reflow. Sounds like a cheap MYDATA TP machine second hand might do the trick, but don't know if it could do 0201 though. You can get a fairly ok manual stencil printer that might do the trick. We had one that had a linear
Electronics Forum | Mon Oct 10 16:02:58 EDT 2005 | pjc
If you don't have a machine, such as from these guys: http://www.pressureproducts.com/SPPC_Hm.htm http://www.smartsonic.com/index2.html http://www.aqueoustech.com/Ultrasonic_Series_Data.htm http://www.emcgti.com/products/product_list.php?cat=8&ca
Electronics Forum | Fri Jan 27 11:03:53 EST 2006 | bvdb
We are a New Zealand company that purchased a used Fuji IP-1 locally. There is no Fuji support here but we've managed to get the IP-1 up and running with just the use of the manuals. There are many things that the manuals do not explain and I would
Electronics Forum | Fri Jun 09 15:46:34 EDT 2006 | samir
I say: �Wave flux needs to be heated to certain activation temps which won't be repeatedly achieved with a manual soldering process. Plus, you won't burn off any residual activator as you would if the board were immersed in a solder bath.� Muse say
Electronics Forum | Fri Aug 04 13:47:20 EDT 2006 | pemea1
apples to apples. 20 boards 80 parts top and 10 parts bottom. these boards are done on a semi regular basis (you know the boards are coming to you from an OEM at least three times a month, just no exact schedule). All that is required is pasting..mo
Electronics Forum | Wed Aug 09 08:46:48 EDT 2006 | pavel_murtishev
Good afternoon, Take my word, bent THT leads will surely cause problems with manual/automatic component insertion, and surely will create voids in solder joints. As a rule, PIH components are placed by hand and good PIH THT manual component placemen
Electronics Forum | Wed Aug 30 03:58:26 EDT 2006 | Ola
Yes you do need a different upline interface card. This information should be in Your Technical Reference Manual, Electronics enclosure chapter 6? Y2 Enclosure, card position X8 Downline and X9 upline: Part No Description. 112045 Base Card
Electronics Forum | Sat Sep 30 10:04:39 EDT 2006 | daxman
I found this pot, and tried adjusting it. It was already turned to its maximum, and the histogram did not look good. I tried replacing the board lamp and this helped the histogram a lot, but I am not able to get the bars centered in the green. The
