Electronics Forum | Fri Sep 20 20:03:55 EDT 2002 | mjabure
Well chip I ought to leave you guys hanging in the breeze on this one , but here goes. Steve, your assumption that the nozzle is calculated as part of the component body for types 11 & 12 is incorrect. during center test on the 643's one of the par
Electronics Forum | Mon Nov 04 15:53:49 EST 2002 | kenBliss
Hi Steve I understand your point, the comments on the thread of which are slightly off of the original posted question but it still is handling. Handling is handling. If you pick up a board from one conveyor just to put on another conveyor that is
Electronics Forum | Wed Feb 04 14:22:13 EST 2004 | Steve Gregory
We just got our new Aqueous Technologies SMT800-LD up and running over the last week, and things seem to be going fine. However, there is one thing I've discovered that I'm not very happy with. The control software that runs the machine has two pass
Electronics Forum | Wed Nov 17 15:04:27 EST 2004 | russ
SMT assembly, First, you must utilize paste otherwise the parts will not stay put. Do you have any leaded devices such as QFPs or SOICs? Dispensing paste by hand is very difficult and time consuming for these types of parts. You can either dispense
Electronics Forum | Sun Mar 06 17:10:41 EST 2005 | Darby
The manual gives you a fair idea here. Reference for the Yamaha manual is THE6006 - I don't know if Philips is the same. Cause is either overload or overcurrent. The manual suggests that you can tweak the trimmers on the driver board but these are us
Electronics Forum | Sat Aug 01 12:06:52 EDT 2009 | isd_jwendell
Unfortunately, I don't see any image. If your part will survive 300C then even convection reflow should work. The use of paste and reflow ovens are for when you move to production quantities. It sounds like you could hand solder your prototypes (proo
Electronics Forum | Tue Oct 05 15:39:35 EDT 2010 | daxman
Hi Steve, I don't know if there are a lot of people who can decrypt the trace data. I think the manual mentions sending it to fuji for analysis. Maybe that would be something worth checking into. Regarding the Mecca check mode: I don't know if it wi
Electronics Forum | Wed Dec 07 17:56:36 EST 2011 | conjugate
I am actually a final year student in Brunel University,London. I`m just started with my major project and the main objective of this project is to perform feasibility study on automation in dust removal. My project title is Automatic PCB Surface Cle
Electronics Forum | Tue Apr 02 12:53:47 EDT 2013 | microaide
I have entered my machine configuration as much as I can figure it out. I will have two machines. One with tape feeders, and the other with vibratory (tube) feeders and a waffle feeder. I've tried to set this up as best I can. But I get to the screen
Electronics Forum | Wed Apr 03 16:07:13 EDT 2013 | microaide
OK, so I think I have figured out the machine configuration for tape feeders. BTW, your procedure for retrieving the X/Y/Z coordinates for the pickup locations was wrong. So I looked it up in the Quad manual. The manual was wrong too. Correct procedu