Electronics Forum | Sat Nov 07 18:18:58 EST 2015 | ttheis
Hi everyone, We just got our first wave soldering machine operational (novastar 8s) and its working great. I'm just a little unsure about how to best maintain the foam fluxer daily. Do you drain it from the machine each day or just cover the flux t
Electronics Forum | Fri Jan 15 17:42:14 EST 2016 | huske
We rarely do profiling so we don't need all the new fancy stuff. But when we do I get a piece of aluminum rod and an empty reel of parts (preferably a 12" reel) fasten the thermocouples and wrap the loose end around the reel. The larger reel gives
Electronics Forum | Mon Feb 29 11:58:41 EST 2016 | dustin
When looking at 0402 parts in our old style Europlacer trolleys, the pick up point is in between two part slots. I have heard that there is a manual adjust somewhere on the sides of the trolley that will let you move part into the pick up window. I h
Electronics Forum | Mon Apr 11 13:11:30 EDT 2016 | gbkellyk
Hi, I hope someone is able help me I have just purchased a used ASYS LSB03 bare board loader and when I have switched the unit on the display reads MODUL 02 OFF also the control panel is frozen and does not respond to any of the buttons when pressed.
Electronics Forum | Tue May 03 10:40:03 EDT 2016 | ttheis
Hi Swag- thanks for the reply. I did check the height definition of the component first. Its defined under the "other" category which I think is OK. Interesting point on the program being jacked- I did manually move those parts to the end of the rout
Electronics Forum | Thu May 12 01:20:48 EDT 2016 | darby
Check your interface boards and connections. Should be in your manual under "control rack/ board connection/ " then they have the various I/F boards. I don't know the initialisation sequence, but a PC whiz or Samsung should be able to tell you the or
Electronics Forum | Thu Jun 02 09:33:50 EDT 2016 | emeto
Hi, if I were you, I would probably go for testing and rework equipment. Adding manufacturing to your business, will most probably exceed your preliminary expectations. Manufacturing is much more complicated than you probably think. I have used manu
Electronics Forum | Wed Oct 12 02:44:38 EDT 2016 | bukas
hello, I have a problem with CP45FV Neo swing mirror. The mirror it self works fine, manually controlled it moves to correct position and back. While working it also moves properly but when machine is about to check for nozzle existence at the end of
Electronics Forum | Tue Mar 07 09:35:55 EST 2017 | buckcho
hello, I have a problem with CP45FV Neo swing > mirror. The mirror it self works fine, manually > controlled it moves to correct position and back. > While working it also moves properly but when > machine is about to check for nozzle existence a
Electronics Forum | Thu Oct 27 14:56:29 EDT 2016 | zippi
Communication parameters is correctly. DB25(Male) > to DB9(Female) wiring as is manual, lenght 1m, > shielded. When i try read mcf CSMUTB program > stoped with error "CSM not respond" or "Cant > established communication", CSM84 display 125 > Co