Electronics Forum | Thu Jan 13 15:17:27 EST 2022 | goseese
Thank you very much I will look for something moving, loose or getting pinched when the table moves. -- Update -- checked every single connector, all the purple cables/connectors too. Everything it tight and not getting hung up. Checked all the
Electronics Forum | Thu Feb 24 00:37:08 EST 2022 | joshsvoboda
I have a pcb with an ENIG finish that is using a 144 pin LQFP and being soldered withSN100C/NC258 T4 paste. I used a oven profiler where the probes are taped down to the joint and the profiling software adjusts the program for the best profile for
Electronics Forum | Tue Mar 15 15:10:57 EDT 2022 | kumarb
Hi. New to P-tools for Yamaha YV88X use. Just created the line1 -> machine1 details -> appear to be able to create fresh board data but doing so manually. Is it possible to import in VIOS text formatted CAD data into this tool ? That is, impo
Electronics Forum | Fri Apr 29 23:57:24 EDT 2022 | auriga2001
I ran a SMT production line with and without SPI. I was also charged with gathering the time and defect metrics when we got our new SPI machine, comparing before and after implementation. It saved time on the printer because it didn't have to handle
Electronics Forum | Mon Jul 25 17:57:48 EDT 2022 | glasscake
Assembleon (Yamaha Re-branded) machines have treated me well as I have 13 machines running any given day. Manuals are readily available in English but are more clear if you can read the original Japanese or Chinese versions. The biggest issue you
Electronics Forum | Fri Jul 29 06:48:11 EDT 2022 | jojoled
I have old JUKI machine, which after power loss seems to have corupted configuration file(all works fine,except Vision configuration for fiducial recognition : camera is unable to read/ write parameters for Vision), can anybody help to tell which fil
Electronics Forum | Wed Oct 26 05:44:39 EDT 2022 | spacecase
Hello all, I was looking at a Samsung SM421-f component placing machine and it's throwing up an error that was not described in the troubleshooting guide. Anytime I try to move the camera or home it the machine stops and the screen says that a skew e
Electronics Forum | Sat Dec 03 01:07:29 EST 2022 | poly
I've got access to the universal manuals / voyager but I haven't found a section that describes the feeder teach setup process, I can pick up the teach slug onto the conveyor and then get into feeder teach but if I teach the corners of the slug as t
Electronics Forum | Mon Dec 26 18:02:37 EST 2022 | rgduval
So, your Hydra Z message timed out... A couple of potential causes: 1. Hydra MOT card failure 2. Hydra z-motor failure 3. Hydra z-motor encoder failure 4. Hydra z-lock failure 5. Disconnected cable 6. X-wagon cable Start by booting into service mod
Electronics Forum | Tue Jul 18 16:49:49 EDT 2023 | mahasg
Hello All, I am PhD student at polytechnique Montreal. We have a CQFP44 packages and Dies of 51um pad pitch (22nm FDSOI tech) that I need to bond myself at the university using ASM Eagle Xtreme gold wire bonder in the university. we need to perform b
