Electronics Forum | Wed Jun 18 06:41:34 EDT 2003 | emeto
Hi Jipp, If we are talking about 200-500 boards per month the main question is"Is it reasonable to go for semi-automatic production?". You will nead at least 1.Manual stencil printer 2.P&P machine 3.Infrared dryer or reflow oven Most expensive par
Electronics Forum | Mon Jul 14 11:09:59 EDT 2003 | samaniegocesar
Hello to all. I have problems with IP1 Fuji machine, the machine was working properly and suddenly appear the erroc code 000C error task 0028 and error address F92228A0, I turn off and On again, I erase the memory but I have the same prblem, I can n
Electronics Forum | Mon Sep 08 06:50:45 EDT 2003 | cyber_wolf
Thanks. I have another question. I believe this machine was originally set up to run nitrogen. In the cooling section there are two chambers. One with a radiator air/nitrogen knives and the other section/chamber has a blower. Instead of running nitr
Electronics Forum | Tue Dec 23 06:00:36 EST 2003 | Grant Petty
Hi, I am now looking at a DEK as an option, and might raise our budget for this to about $150K. I am not sure which model to look at. We want to do 0201 reliably, and so we need accuracy, but we would also like to get vision inspection so we can let
Electronics Forum | Wed Dec 17 08:49:04 EST 2003 | patrickbruneel
Kev, It looks like you have a preheating powerplant and you still only get the board up to 85 Deg. This indicates that the preheating is out of calibration or the range settings might be very wide (Fex the preheat elements shut down at 500 and go ba
Electronics Forum | Thu Jan 08 16:21:05 EST 2004 | Bill
James: The ovens can be calibrated to help get this a little closer. In the computer box are 3 cards (alike) attached to the motherboard. They are called IPS-7 cards. On these cards are 2 potentiometers to calibrate the T/Cs for the heat zones. There
Electronics Forum | Wed Jan 28 01:27:30 EST 2004 | Martin Silberkuhl
First of all, sorry for my bad english (I'm german)!!! We have the following problem: we assemble 6pcs. smd 30pin connectors on one of our boards that we produce. These connectors have a top cover, that the pick&place machine can put it on the board
Electronics Forum | Sun Feb 08 17:30:18 EST 2004 | Hoss
I'm being driven to create a DFM guidelines document to keep our engineering team and customers from running amok. I've conceptualized an outline and basically know what needs to be covered but would like to plagerize all I can (more for photos/diag
Electronics Forum | Wed Apr 14 10:58:12 EDT 2004 | heatherc
Aegis software offers an MES system that offers both automated and manual data collection points. All of the data collected is automatically deposited in one central database. This database is then used for generating all of the SPC reports for ana
Electronics Forum | Wed Apr 21 07:32:04 EDT 2004 | podge
Hi, We have been using the Crest Solutions Reelscan system here for about 3 years on 8 lines and it has pretty much eliminated wrong part placement. We use it on a variety of SMT placement machines and i believe it can be adapted to any type of place
