Electronics Forum | Wed Feb 16 15:29:15 EST 2000 | John S.
My company manufactures electronic modules for the automotive industry. We have a current product that the customer would like a "heavy duty" version of. The module will have to handle roughly twice as much power as the original. A couple of compo
Electronics Forum | Mon Jan 29 11:52:55 EST 2001 | blnorman
We have been using a VOC-free, no-clean flux on our boards that we conformally coat with no problems. We're using both a UV cured and a heat cured Silicone conformal coating. One thing to beware of is inhibition in the silicone. We found that out t
Electronics Forum | Tue Feb 27 11:28:08 EST 2001 | fkurisu
Hello Mark, It is possible that SolderMask, Inc. could selectively remove the existing solder mask, clean and reapply a Photoimageable solder mask to the BGA area. Mostly likely the mask on your boards is a Liquid Photoimageable Solder Mask (LPIS
Electronics Forum | Tue Mar 13 14:25:14 EST 2001 | Mike Konrad
Hi Kerry, I do not wish to turn this subject in to a debate, but consider this� If every technical question posted resulted in a commercial reply (company name, model number, phone number, price, features and benefits, etc), then there would be lit
Electronics Forum | Thu Mar 08 12:40:54 EST 2001 | Ralph Merk
We are currently using 0402 resistors and capacitors in our production process. Our equipment is as follows: - DEK 265 - Siemens S25/F5 - Vitronics XPM520(5 zones) - 2% silver solder Alpha WS678 The problem is that randomly some 0402 capacitors are
Electronics Forum | Thu Mar 22 16:35:06 EST 2001 | Steve
Deja vu! When I read your response I turned around to see if you standing behind me listening to our problem. We currently make about 50 different boards all using no-clean that have no problems, yet this newest boards has a couple of issues that eng
Electronics Forum | Thu Apr 05 08:02:33 EDT 2001 | brownsj
I used to work for a company called Intelligent Reasoning Systems Incorporated. http://www.irsinc.com based in Austin Texas. They manufactured two different AOI systems depending on the component packages you wanted to inspect. The good thing about t
Electronics Forum | Wed Apr 04 10:00:17 EDT 2001 | keith47611
Ryan, I agree with J.D, and emphasize that the single biggest issue is "partner". We are extremely succesful with our US manufactured product in the Japan marketplace, but this success is solely due to partnering with a very capable and talented "d
Electronics Forum | Wed Apr 11 06:56:20 EDT 2001 | brownsj
Most of the component vendors I've dealt with will guarantee the solderability of the terminations for three years if the components are still packaged in a full reel. If the reel is part used we've kept them for 1 year and then used a wetting balanc
Electronics Forum | Wed Apr 11 06:56:46 EDT 2001 | brownsj
Most of the component vendors I've dealt with will guarantee the solderability of the terminations for three years if the components are still packaged in a full reel. If the reel is part used we've kept them for 1 year and then used a wetting balanc
Electronic manufacturing services - electronic design, development and manufacturing. Circuit board design, prototyping, FPGA services, signal integrity and simulation, pcb assembly. Factories in California USA and Malaysia.
Manufacturer / Consultant / Service Provider
3240 Scott Blvd
Santa Clara, CA USA
Phone: +1 408 980 0400
.gif)
