Electronics Forum | Wed Apr 25 19:19:42 EDT 2012 | padawanlinuxero
Hi is me again If what you are looking is for the AOI to "see" the marking on a resistor theres the option of taking a picture of only the numbers in the resistor is not highly accurate but it works.
Electronics Forum | Thu May 31 02:02:37 EDT 2012 | robertwillis
Very good practical solution from Darby, I was going to say sample board or picture. in the old days we would have a board with location marks Bob Willis
Electronics Forum | Mon Jun 04 09:32:23 EDT 2012 | pr
IPC-610 should tell you if the joint is suspect. I would tend to think they would not have any negative effect.
Electronics Forum | Tue Jun 05 08:40:46 EDT 2012 | rway
How deep is the indent? I would say as long as it is hitting nothing but net (the solder fill), your fine. Besides, you should notice indents on your solder fillets of components on the top-side as well. This is also expected and acceptable.
Electronics Forum | Mon Nov 19 05:37:21 EST 2012 | eniac
Good table, but I think that first of all - this is data-sheet from manufacturer of your capacitors. This part of web-site (about capacitors) - just a basic information, which we need for a common understanding.
Electronics Forum | Mon Jan 28 11:50:23 EST 2013 | johng
Good morning Mark, No issues around the masking at this point. The issue seem to be in open areas as well as between clad runs. We are using Humiseal 1A33 Conformal Coat.
Electronics Forum | Mon May 06 11:16:07 EDT 2013 | rdubya
if you don't have anything obstructing the camera then it sounds like it could be the camera power supply going bad. what version of tpsys are you running?
Electronics Forum | Mon May 06 11:24:04 EDT 2013 | amelby
Hi, Thanks for the help, The software on the Mydata is at least 2.9 I just had it upgraded last year. Arnie
Electronics Forum | Mon Jun 17 06:56:50 EDT 2013 | bobpan
Did you teach the reject mark? Sounds like a lighting issue when looking for the white sticker. You can also skip images by pressing control-repeat after the machine has found fiducials. Good luck
Electronics Forum | Wed Aug 21 08:17:19 EDT 2013 | TB
We are just looking for something to get trainees familiar with the different polarity marking so they know what to look for.
