Electronics Forum: marking rob (Page 1 of 3)

Motorola Optocoupler marking

Electronics Forum | Mon Jan 30 07:22:51 EST 2006 | Rob

Hi Nick, It's probably one of two devices - MOC8020 or MOC8021 depending on the CTR (Current transfer ratio). I have always used http://www.icmaster.com for older semiconductor datasheets. (Back in the old days we used to use the IC master data boo

SMT LINE CHOICE

Electronics Forum | Wed Mar 21 14:12:38 EDT 2018 | rob

Yep, especially if they are the silicon domed type that mark easy. We gang pick LEDs on our Yamaha kit, getting 12 at a time per side, but we have the luxury and volume of having multiple reels of the same components.

Online Label printing & placement

Electronics Forum | Mon Sep 12 03:38:03 EDT 2016 | rob

Hi John, We picked up a used laser marker (Asys ALS03) last year for around 30K euros and it has done approx 2M codes (we use 6mm square QR) in the last year without fault - it reads them all back to confirm which is handy. We also use labels, and

JUKI vs UIC Pick N Place Machines

Electronics Forum | Fri Apr 06 02:17:15 EDT 2018 | rob

@ Sr.Tech, Most of our Chinese spares are Juki & Yamaha original & still bagged, just much cheaper. They wouldn't sell machines in China if all the spares and consumables were at European mark ups. Nozzle wise the Juki 750 & 760 copies are not 100%

Board House Pcb Question

Electronics Forum | Wed Mar 15 22:08:20 EST 2006 | davef

Brad We agree with Rob. Even if the fab marks the fids [on both sides] to reduce component attrition, you'd be surprised in the amount of paste that 'disappears' on x-out boards. Do the numbers [follow the money].

PC Board Marking

Electronics Forum | Mon Jul 09 16:14:06 EDT 2007 | rgduval

A number of years ago in a previous life, we discussed laser marking 2-d matrix codes. We had a number of boards for customers that just were too populated to get any sort of a label onto. 2-D laser units were avaialable to work in line with our au

Placement costs

Electronics Forum | Tue Jul 24 08:44:17 EDT 2007 | rgduval

Ron, I'd agree that that sounds high. Some things that may be contributing to it: Volume. lower build quantity often leads to higher placement costs. NRE. Does this website quote an NRE for solder stencils, machine programming, and reflow profili

Max temp on a lead free part

Electronics Forum | Fri Nov 05 05:06:18 EST 2004 | rlackey

Thanks Mark, we're not going to go anywhere with that particular supplier now. Cheers, Rob.

soldering robot

Electronics Forum | Wed Mar 28 10:58:13 EDT 2007 | rlackey

Hi Mark, When we last checked out the laser systems you had to either use a solder preform or apply solder paste to the area, which meant either dispensing or some clever printing. Cheers, Rob.

Fuji CP6 Y-axis placement problem

Electronics Forum | Wed Mar 19 15:59:40 EDT 2008 | rmitchell

Hi, I am having some problems with my CP6 placement changing in the Y axis. I had to move all parts by +.12mm this morning. Then after 20 boards the placement shifted too high by about .12 mm The IP stayed the same with the same pcb's and fid coo

  1 2 3 Next

marking rob searches for Companies, Equipment, Machines, Suppliers & Information

Vacuum Reflow Soldering

We offer SMT Nozzles, feeders and spare parts globally. Find out more
Vacuum Reflow Soldering

High Precision Fluid Dispensers
PCB Handling with CE

High Throughput Reflow Oven
Solder Paste Dispensing

World's Best Reflow Oven Customizable for Unique Applications


SMT & PCB Equipment - MPM, DEK, Heller, Europlacer and more...