Electronics Forum: ments (Page 1 of 3)

Leadfree Dross in Wave Solderpot

Electronics Forum | Thu Mar 03 09:47:31 EST 2005 | Marc

Sorry Dave.. Ment to say "heavy" but the phone rang, people in the office... thanks marc

Best scope to solder under....

Electronics Forum | Thu Mar 22 13:48:23 EDT 2007 | Gary

Sorry. I ment to send you to http://www.smttools.com/ Look at the BGA-100 scope.

soldering and bonding on gold PCB's

Electronics Forum | Wed Jan 09 21:19:49 EST 2002 | davef

When I said "In this area, there is no difference between your experience in ceramic substrates and PTFE substrates." I was referring to the area we were discussing ... gold plating. I am sorry if you thought I ment than the wire bonding process wa

mil to mm conversion chart

Electronics Forum | Tue May 25 17:24:00 EDT 2004 | davef

We get confused when using the term "mil". Is this "mil" ment to be: * One thousandth of an inch? * A millimeter? If it's to be "one thousandth of an inch", we prefer the decidely UK notation "thou".

HDMI Connector poor contact

Electronics Forum | Wed Aug 11 02:53:44 EDT 2004 | praveren_madaan@jabil.com

Hi Abraham, We are using SC10 solvent from Alpha which is ment for No clean flux residue cleaning. Thanks

failure of ESD sensitive chips

Electronics Forum | Sun Oct 09 10:58:53 EDT 2005 | Mika

Of course all electric components are ESD-S. But what I ment, was there any particular extra ESD-S chips. Sincerly,

Solder Joint

Electronics Forum | Mon Jan 29 10:57:16 EST 2007 | davef

Maybe your customer ment to say something like: reliability in actual use does to a large extent depend on the heel fillet and the 'bottom flat' wetting. If the foot length is

Indium / Tin Intermetallics

Electronics Forum | Thu Aug 24 13:18:24 EDT 2000 | Dave F

What are the primary indium (In) / tin (Sn) intermetallic compounds (IMC)? What are the drivers to the formation of In/Sn IMC? Copper / tin IMC are very bittle and, while necessary for proper solder connection formtion, are ment to be minimized. W

Reflow Oven Monitoring

Electronics Forum | Mon Aug 05 09:06:29 EDT 2002 | Adam

I'd like to ask for feedback on monitoring the reflow oven using a copper plate.Are there any articles relating to the above, in the sense of what size the copper plate should be, how many thermocouples should be attached, the frequency of measure me

Vent Residue Cleaning

Electronics Forum | Wed Aug 21 18:30:16 EDT 2002 | dragonslayr

am reminiscent of a time, after some hard duty at the local drinkin hole, having sneezed and my vent pipe expurgated. ooowwweeee - what an em bare ass ment won't go into details about clean up method or fancy swabbin tools or high tech fluids requir

  1 2 3 Next

ments searches for Companies, Equipment, Machines, Suppliers & Information