Electronics Forum: mfu and interface (Page 1 of 4)

MCS30 operating system and Fuji user interface info?

Electronics Forum | Tue Oct 20 17:30:15 EDT 2009 | rodrigo

Hi all, We use the IMF converter (and a floppy disk) to move programs to and from the MCS30. The only way to get to the command line in the MCS30 is to reboot and do the ctrl+shift+_ ketpresses. I wanted to try to add an entry to the Fuji User inter

Universal HSP/GSM and Unicam

Electronics Forum | Mon Apr 17 16:22:29 EDT 2006 | jaimebc

Are there any users currently working with Unicam and Universal HSP and GSM? If so, what offline interface are you using? USOS or UCT-52. Was there any conflict between Universal's interface and Unicam? Thanks

wave pallets and titanium

Electronics Forum | Tue Sep 11 12:56:03 EDT 2007 | jsloot

Can anyone give me any information on the longivity of titanium insert wave pallets. What I am looking for is the integrity of thin walls over several hundred cycles and the interface between the insert and the durostone material.

Pick and placement forces

Electronics Forum | Wed Nov 24 06:24:52 EST 2004 | Joe

Hi, I am an Engineering student doing some research on the component/nozzle interface on SMT Pick and Place machines. Could anyone tell me the force at which the nozzle hits the component as it is picked from the feeder or the placement force on a

MPM Up2000 and SMEMA

Electronics Forum | Wed Sep 14 02:41:49 EDT 2016 | bukas

here is well explained SMEMA interface http://www.daghee.com/?p=326 so, disconnect printer from upline modules and check are any 2 of 4 pins shortened(should be pins No 1 & 2) while machine is ready state. when machine is in busy state the same pin

wave pallets and titanium

Electronics Forum | Wed Sep 12 17:09:11 EDT 2007 | allwave

HI John, I use wave fixtures with titanium inserts. So far I have not seen any problem with walls about 0.010" thickness and 0.120" tall (or deep depending how you see it)...The Titanium-composite interface is also very strong (as long as you have e

AOI, Quality and SPC

Electronics Forum | Thu Mar 06 11:37:17 EST 2003 | msivigny

Hello Phil, sorry for the confusion, because of our level of defect control and tracking at each process step, we did not use AOI systems at the time. We had a manual inspection station after reflow, then ICT and Functional/Final test for each produc

AOI, Quality and SPC

Electronics Forum | Tue Mar 04 16:50:56 EST 2003 | msivigny

Hello Rohan, this is starting to date nearly 6 years ago but I will remember everything I can, we used a custom interface to input data and everything was stored in a very large database on a specific server only for quality data, I think we used Ora

JUKI KE2060R and KE2060L

Electronics Forum | Mon Sep 21 04:23:16 EDT 2009 | smtbox

R series Features FCS (Flex Calibration System) highly regarded easy maintenance just got even easier! The optional FCS calibration jig is a simple to use system to re-calibrate placement accuracy. The machine automatically picks and places jig comp

AOI, Quality and SPC

Electronics Forum | Mon Mar 03 13:18:02 EST 2003 | msivigny

Hello phil, The use of AOI systems give us the opportunity to auto-collect defect information much the way you're using them now. AOI systems become extremely effective when the collected data is used to perform some positive change into the process.

  1 2 3 4 Next

mfu and interface searches for Companies, Equipment, Machines, Suppliers & Information