Electronics Forum: miniaturization (Page 1 of 4)

tcm3000 miniature bearing servicing

Electronics Forum | Wed Feb 05 11:22:47 EST 2003 | pjc

Why not ask Sanyo? Nissei Sangyo, Tel: 972-257-8100

tcm3000 miniature bearing servicing

Electronics Forum | Tue Feb 04 21:49:29 EST 2003 | Bach Huss

We have TCM 3000 in house. The problem is we have alot of nozzle bypass (up-down) problem due to the miniature stroke bearing looses it's librication or dust collected in the bearings. Anyone has any idea what grease or lubricant that can be applied

Vibratory Pin Feeders

Electronics Forum | Tue Jun 03 22:05:18 EDT 2003 | ramanandkini

I assume you need vibratory parts feeder to improve your productivity for pin header assembly. We use lots of vibratory feeders for small, miniature mechanical parts. We also have a machine building department in our company that can handle your requ

After a bit of printer pneumatics chat

Electronics Forum | Thu Aug 23 11:51:58 EDT 2012 | ericrr

Mind you I could ask for a “pneumatic miniature elbow” my what a big picture I posted.

After a bit of printer pneumatics chat

Electronics Forum | Thu Aug 23 17:55:44 EDT 2012 | spitkis2

You need a fitting (brass or stainless steel. As mentioned above, McMaster Carr is one source. Look here http://www.mcmaster.com/#miniature-brass-barbed-tube-fittings/=iz8t1h You will need to know the thread.

IPC Class 3 Annular Ring and Fine Pitch BGA Challenges

Electronics Forum | Fri Sep 08 21:49:24 EDT 2017 | sbar5781

Hello, I have a few PCB boards i am trying to be manufactured that are miniaturized medical devices. Thus they require IPC Class 3 Specs. However as miniature devices they have limited space, including a 0.4mm pitch BGA socket, which currently has

After a bit of printer pneumatics chat

Electronics Forum | Thu Aug 23 14:57:08 EDT 2012 | ericrr

Thank you very much RLM umm I think maybe I did not explain correctly, see at the (middle) right eye side of the picture, there is a hole with internal thread, I need (lets call it a “miniature elbow with bend”) to screw into the hole and attach the

Miniature Radio Receiver Antenna

Electronics Forum | Sat Jul 22 14:35:26 EDT 2000 | Roger A. Wehage

I recently heard (but can�t remember the source) that radio receiving antennas much smaller than the quarter wavelength or so necessary to obtain sufficient signal strength were being developed. I think the process may be based on digitally correlati

tcm3000 miniature bearing servicing

Electronics Forum | Wed Feb 05 11:31:40 EST 2003 | lloyd

The grease to use is DAPHNE EPONEX M No. 1 as you would expect it is made by an oriental company (IDEMITSU KOSAN). Sanyo recommend that this procedure should only be carried out by trained personnel, so it may be worth giving them a ring before you s

SMT LED functional failure

Electronics Forum | Wed Apr 16 01:40:17 EDT 2003 | praveen

Hi , We are using water wash solder paste to solder the SMT LED's manufactured by Chicago Miniature lamp (CMD93-21 & 22)and Kingbright. Achieving the solder fillet , wetting has no issue but we observe high fallout at the functional testing. If we do

  1 2 3 4 Next

miniaturization searches for Companies, Equipment, Machines, Suppliers & Information