Electronics Forum | Wed Nov 18 14:42:22 EST 1998 | Dave F
| I heard somewhere that SMEMA has joined IPC, and that the association has decided to boycott Nepcon from | year 2000. Can anyone tell me if this is true | Nick: SMEMA and IPC are talking about merging (EP&P, 11/98, p 18). Below is a news release
Electronics Forum | Thu May 14 10:00:14 EDT 2015 | swag
I like MpM personally - run forever and programming is easy and leads you through it. It's hard to miss a step of programming with MpM software. DEK's a little harder (for me) but still very nice controls. The pluses of DEK - DEK has a high freque
Electronics Forum | Mon Dec 06 00:44:45 EST 2004 | donb
You probably have already done this... but you need to enter the maintenance program with the maintenance key, select "Set Prefs" scroll down to "Upline Machine" and enter "Fuji".
Electronics Forum | Thu Oct 05 13:00:33 EDT 2006 | john_smith
CN, I forgot a couple things. The DEK printers are easy to program at about 3-5 min. The MPM is a little more difficult to program and it takes about 20-30 min. Resale value is also in DEKs favor. Just look around in the equipment section and see all
Electronics Forum | Thu Oct 05 16:45:19 EDT 2006 | realchunks
Wow, I'd have to say the exact opposite. Compared to MPM the DEKs were WAY longer to program. But find out for yourself CN. Program each and get back to us. Don't forget to program in 2D as well. That will be the kicker! As for spending money,
Electronics Forum | Mon Oct 09 20:14:29 EDT 2006 | marcelll
I'm repairing SMT for 20 years and I've worked with both machines. From my experience, I always had a bunch of problems with DEK printer and the service is terrible if your not a big one. MPM is more reliable, parts cheaper & service much better. Pro
Electronics Forum | Mon Oct 09 14:30:44 EDT 2006 | Brian
I agree with Chunks. Programming was much simpler. The 2D inspection is much better on MPM. I didn't have to use offsets on the MPM or the DEK very often, but did more on teh DEK. I didn't like the front justified stencils on the DEK. I also did
Electronics Forum | Thu Oct 05 21:14:08 EDT 2006 | chrisgriffin
I'm with Chunks on this. In my experience MPM's are very accurate and reliable. There are so many out there because people like them. You can make a program with 2D inspection in about 10 minutes. Things do sometimes break on the 3000's, but not
Electronics Forum | Fri Oct 06 14:54:30 EDT 2006 | Cmiller
I believe the early UP3000's had some significant mechanical issues. We have 3 UP3000 Ultraflex machines. We bought them used. These are great machines and easy to program but you need to have operators that really understand the machine. I dont thin
Electronics Forum | Fri Apr 30 10:42:40 EDT 2021 | oxygensmd
I have a customer who ask close to prototyping jobs with low volume and high-mix components. A regular job have around 5-30 pieces board but have high quantity and many type of components. All the time over 1000 pieces of parts on board from 250-350
winsouce.jpg)
