Electronics Forum: missing and feeder and slots (Page 1 of 2)

does anyone know about JUKI electric feeder and machinery feeder difference

Electronics Forum | Mon Jul 25 03:39:25 EDT 2016 | rob

A 200% + increase in load time certainly erases > any thoughts of efficiency in my mind. We have tried the Visker Electric feeders out (Yamaha & Juki)and they are nice and smooth, with a faster recovery rate, also adjustable pitch. However, with

Mydata Pick and place

Electronics Forum | Thu May 10 02:57:03 EDT 2001 | kjellman

Hi, Why not have a look at Philips/Assembl�on, their ACM machine is quite nice. It may also bring you down to Flip Chip, 0201 some through hole and odd form placement. Nice options like bulk feeding, coplanarity tests, fluxing for FC, prom feeders (

SMT optimization and improvement

Electronics Forum | Wed May 31 22:17:24 EDT 2006 | EC

Hi Jack, I do not know what type of machine you are using and how old is your machine. But I have this problem before using Fuji machine. There are few things cause part throw.....placment speed, feeder, pick up tolerance, part dimension tolerance,

BGA and QFP orientation in trays for pick and place

Electronics Forum | Fri Jan 16 07:48:29 EST 2004 | Mika

We usually program the components in the component database with pin 1 in the lower left corner. Then in the feeder database we set the component orientaion to 270 deg for Tray feeders(turn the tray in the feeder 180 deg) and "tube" feeders. For tape

Universal GSM and 0402/0201 Placement

Electronics Forum | Fri Jan 16 16:57:14 EST 2015 | dilogic

I doubt you will be able to get satisfactory results with 0201. 0402 is another story. When doing 0402 projects, we use only electric (MP) feeders and always at the same feeder slots (feeder teach done for each of them). MPF08 nozzle works fine. Also

tape splicing pros and cons

Electronics Forum | Thu Sep 22 10:48:08 EDT 2005 | Rob

Cheers Greg, It's unusual to have such direct access to manufacturers & their opinions. I'll tell you what really does get us, and splicing doesn't work well on these occaisions - big SMD connectors, requiring deep pocket feeders. You only get m

essemtec csm7100/csm7000 and pantera assistance

Electronics Forum | Sun Oct 31 03:46:34 EDT 2021 | earesearch

Hello, I currently have several csm7100, csm7000plus and pantera xv from essemtec. I wanted to see if anyone here was interested in training per hour or job. I have another friend who also has a csm7000 and needs some assistance in a few areas to g

tape splicing pros and cons

Electronics Forum | Thu Sep 22 08:06:13 EDT 2005 | gregp

Hello Rob, We have reel hangers on our feeders as opposed to "buckets". The reels cannot be removed while the feeder is mounted to the machine. Thus splicing is not currently an option. As mentioned above, we felt that it is easier to remove the f

Mydata TP9-2 and TP11-UFP difference

Electronics Forum | Thu Jul 18 17:38:27 EDT 2019 | rgduval

Not swapping out feeders....swapping out magazines. It only works well if you have enough extra mags to load all the feeders on. And is a viable solution if your position limited on your machine. Before the advent of Aegis feeders for My machine

CSM-84 pick and place machine.

Electronics Forum | Sat Feb 12 18:35:56 EST 2011 | gabriel1blue

Thank you, that works perfect!! Now I was able to set up the offset's and program the machine, but now head #1 will move to the feeder location but it will not move down to pick up the part, then it moves to the drop area, but its only happening on h

  1 2 Next

missing and feeder and slots searches for Companies, Equipment, Machines, Suppliers & Information