Electronics Forum | Wed Jan 26 21:23:51 EST 2000 | Dennis
Hello! all Will anybody give me advice for missing componets for 0402, 0603 R or C chips? I am not gonna tell you which machine I use, but from my experience, every p&p machine has possibility for missing component after placing 400 or more componen
Electronics Forum | Thu Dec 11 19:32:11 EST 2003 | stefwitt
Let me guess, you are talking about a Siplace S15 or F3. The bearings around the sleeve could be dirty and create too much friction for the little turning motors to rotate the sleeve. What do you mean by parts missing? Are you saying components are
Electronics Forum | Thu Dec 11 23:38:44 EST 2003 | liang
Thank you Stefan for your help! our machine is hs50.you are right we means components are not placed on board.we can found the part around the loctation.i found bearing is dirty.i clean it with threebond.it can work well. but i want to know the rootc
Electronics Forum | Sat Dec 13 08:03:46 EST 2003 | Stefan Witte
The only part, which could cause component misplacement on the rotary heads of the Siplace machine is the vacuum valve. I don�t know the official name in the part catalog, but I use to name it plunger. The plunger is moved in and out by a miniature s
Electronics Forum | Wed Jan 26 21:38:53 EST 2000 | Dave F
Dennis: I cast my vote for: poor maintenance. Ta Dave F
Electronics Forum | Wed Jun 05 10:16:29 EDT 2019 | emeto
Sankar, it looks like you need an expert to help you. Missing component might be related to hardware, machine setup or software issues on you equipment which will require a tech or engineer to investigate.
Electronics Forum | Thu Jan 27 10:22:21 EST 2000 | JAX
Dennis, Not sure why your so secrative about what machine but I guess it doesn't matter. When you start placing 0402 & 0603 packages the difference between height and width and length gets lost in tolerance. This allows the machine to pass parts t
Electronics Forum | Tue Aug 08 14:07:59 EDT 2006 | Chunks
Tell him what he's won Ron!
Electronics Forum | Mon May 06 11:50:15 EDT 2019 | sankarseptember
I am using siplace XS Series mounter..I am getting component missing.. atleast one or two per shift production..I wonder this machine don't have option to check at last if any miss or thrown up component.what I need to check? I need any expert in sip
Electronics Forum | Thu Jan 27 19:14:27 EST 2000 | Dennis
Thanks! It is right that solder paste is somewhat responsible for misssing components in our case. I took a look at the board after placement and I found that component hit the paste, but no where on the board. I guesss dry solder paste (operater pri
