Electronics Forum | Wed Oct 30 13:30:54 EDT 2019 | tnachamp
The consumables monitoring option totally disappeared from one of our printers. It used to show the level of paste, paper and solvent and now that window is totally black. I was wondering how we could get that option back onto the monitor. Thanks in
Electronics Forum | Fri Nov 01 20:24:15 EDT 2019 | dekhead
> Machine Setup >> Options >> TTG & BTG Enable
Electronics Forum | Wed Apr 19 04:41:42 EDT 2006 | ge_lim
Hi I am using selective soldering to dip soldering the connector pins to the PCB and would like to know your experience: a) Is there a recommended dip or dwell time for the dip soldering? b) How do we improve the solder coverage in the TH? c) How t
Electronics Forum | Thu Apr 20 08:49:08 EDT 2006 | Chunks
a) Is there a recommended dip or dwell time for the dip soldering? Check your data sheet for the part. Dwell time is everything in selective soldering. Top side wetting is a good process indicator. b) How do we improve the solder coverage in the
Electronics Forum | Mon Mar 16 14:58:22 EDT 2020 | tnachamp
Thank you for the response. It is strange that the TTG & BTG option is available on our other DEK but is not in this particular DEK. Both machines have the same software and version.
Electronics Forum | Wed Apr 26 10:21:09 EDT 2006 | slaine
Hi you need to dip long enough for the temperature of the part being soldered to reach about 20 degrees above liquidus of the solder. For the small parts we dip solder we had Sn62 and SAC387 baths set to 250 degrees and this seems to work best for us
Electronics Forum | Tue Jan 27 07:56:15 EST 2004 | siverts
Don't forget the monitor's. There are only two ways to get out of this problem, if the monitor get's magnetizised: 1. Replace the monitor. 2. Turn in the monitor to a Tv-repairman that can do a de-magnetizing of the monitor.
Electronics Forum | Mon Jan 07 15:51:53 EST 2002 | radney
Does anyone know of an alternate source or a monitor that can be used in place of the old Mitsubishi monitors. Surely there is a newer replacement. Universal/Sanyo wants about $8k for these. The monitor that is in there now is a Mitsubishi XC-1498
Electronics Forum | Wed Sep 21 02:58:33 EDT 2005 | ajay
we are using MCS30 for fuji line. Now monitor is giving some problem. we can not replace it with normal monitor. this monitor is with key board. any solution to connnect with normal monitor ? ajay
Electronics Forum | Wed Nov 10 06:32:20 EST 1999 | Lee Radney
We lost the video on a touchscreen monitor that goes in in our HSP 4791 machine. The touchscreen still works but the monitor portion is dead. The monitor is a Mitsubishi Model number XC-1498C II... The Microtouch numbers are as follows....Model #
.gif)