Electronics Forum: mounted (Page 1 of 215)

vertically mounted PTH components

Electronics Forum | Wed Aug 11 02:21:07 EDT 2010 | mbulelo

Hi All Is it advisable to vertically mount PTH componets and if so, which direction is most suitable

vertically mounted PTH components

Electronics Forum | Wed Aug 11 14:45:46 EDT 2010 | davef

Yes, it OK to mount axial PTH component as radial PTH, if that's what you're asking. * There are no rules for orientation. Pick something and stick to it. We like to be able to read the component value / orientation from the top towards the board.

PTH connectors mounted on SMD process

Electronics Forum | Tue Dec 21 17:11:18 EST 1999 | Pascal G

Hello guys , we just started first trials on PTH connectors mounted in SMD. Our first results show big deviation of solder filing in the hole and also a dramatic decreasing of mounting spped on pick & place equipement. 1 - Did someone uses proflow

Plastic BGA mounted on Alumina substrate

Electronics Forum | Wed Jun 25 03:49:17 EDT 2003 | M.DAttilio

Hello everyone, my company produce Alumina PCB. Till now we mount ceramic BGA on alumina substrate, but now it's hard to find ceramic components so we'd like to mount plastic BGA on this kind of substrate. Do you know problems about it? Please, if yo

Re: PTH connectors mounted on SMD process

Electronics Forum | Wed Jan 05 12:33:01 EST 2000 | Vahid Vatannia

Thanks for the info. I am going to call AMP and ASG. Thanks again.

Re: PTH connectors mounted on SMD process

Electronics Forum | Tue Dec 28 16:00:38 EST 1999 | Vahid Vatannia

Dan, Is there an article or a paper that compare solder joints strenght verses pressfit? Thnak you.

Re: PTH connectors mounted on SMD process

Electronics Forum | Wed Dec 29 18:28:12 EST 1999 | Dave

Does anyone have information on any automatic machines that place pressfit connectors (manufacturers, cost, websites, etc.)?

Re: PTH connectors mounted on SMD process

Electronics Forum | Thu Dec 30 10:56:08 EST 1999 | Dan Woodward

Hi Dave, ASG in Florida (www.goasg.com) manufactures machines specifically to pick and place pressfit connectors, including vision inspection of the pins. They also manufacture a line of electric servo presses for pressfit connectors. I would be hap

Re: PTH connectors mounted on SMD process

Electronics Forum | Thu Dec 30 22:51:51 EST 1999 | Dave F

Dave: Dan's correct. ASG is good. Consider Motion Automated also. good luck. Dave F

Re: PTH connectors mounted on SMD process

Electronics Forum | Mon Dec 27 02:47:14 EST 1999 | Eyal Epstein

We at Celtronix have extensive experience and customers, whom we have supplied Pin in Paste solutions. We can send you a lot of information, including references to our customers. Celtronix is a supplier of odd form automation solutions, including ma

  1 2 3 4 5 6 7 8 9 10 Next

mounted searches for Companies, Equipment, Machines, Suppliers & Information