Electronics Forum: mpm accela (Page 1 of 2)

MPM Accela

Electronics Forum | Sun Jan 17 07:42:41 EST 2010 | edmaya33

We have had our first MPM accela since 2007 and up to this moment, the machine never had a major breakdown.We have this machine running 24/7 on our high volume line supplying a 14 module M6S NXT machine. It can handle a beyond specs warp boards and

MPM Accela vs DEK or other options?

Electronics Forum | Thu Mar 17 11:26:21 EDT 2022 | proceng1

For MPM, PPM in New Hampshire is the best I've found for service. Now the absolute MPM guru recently left the company, but they still have good technicians and lots of parts.

MPM Accela vs DEK or other options?

Electronics Forum | Sun Mar 13 12:45:12 EDT 2022 | poly

Do you have any idea for the Ekra (or any other printer, especially MPM) how many cycles it can do before you should look for a new printer? How used is too used? 1 millon? 2? 10?

MPM Accela

Electronics Forum | Wed Jan 13 13:46:53 EST 2010 | cyber_wolf

Can anyone provide us with some input on these machines? How well do they handle warped boards..changeover..programming..etc..

MPM Accela vs DEK or other options?

Electronics Forum | Sat Mar 12 20:39:29 EST 2022 | oxygensmd

Maybe check EKRA X5, X5Pro too. Our E5 can fit to your requirement and way cheaper machine are them. As I saw, KavSys have a good-running X5Pro.

MPM Momentum Screen Printer Paste Inspection problem

Electronics Forum | Mon May 13 13:45:33 EDT 2019 | whitelancer64

I am having the same problem with the MPM Accela solder paste printer machine. If the fiducials are adjusted for PCB alignment, the location of the paste is then wrong, and vision inspection fails. This is a problem for both pad preview inspection

MPM Accela vs DEK or other options?

Electronics Forum | Fri Mar 11 13:03:08 EST 2022 | poly

I've just bought the pick and place machines (universal Genesis GX11 and GC30) and oven (RO300fc-c) but I am confused about printers. I've put in an offer for an MPM Accela (2006 or 2008) but I'm not sure if it's a good idea / deal. It's being sold i

High-end SPI and AOI?

Electronics Forum | Tue Oct 13 08:09:53 EDT 2009 | kudamarani08

Can anyone help me recommend or simulate a SPI and AOI machine that can balance our FUJI NXT 1 with 14 modules. We are using MPM accela printer. 200 UPH is our target. Here's the PCB dimension length(x) = 399.92mm width(y) = 141.626mm Thanks all!

MPM Accela vs DEK or other options?

Electronics Forum | Mon Mar 14 20:05:30 EDT 2022 | cbeneat

We are still running an EKRA X5. 2008 build. 1,366,000 cycles. Being swapped out in the near future with an X5 Pro. But we're going to hold it for emergencies. We've found the older X5's are pretty bullet proof. Just keep up on the maintenance.

High-end SPI and AOI?

Electronics Forum | Tue Oct 13 22:56:22 EDT 2009 | cpcompany

Can anyone help me recommend or simulate a SPI > and AOI machine that can balance our FUJI NXT 1 > with 14 modules. We are using MPM accela printer. > 200 UPH is our target. > > Here's the PCB > dimension > > length(x) = 399.92mm width(y) = >

  1 2 Next

mpm accela searches for Companies, Equipment, Machines, Suppliers & Information



Wave Soldering 101 Training Course
PCB AOI

High Precision Fluid Dispensers


500+ original new CF081CR CN081CR FEEDER in stock