Electronics Forum | Tue Oct 21 09:36:50 EDT 2014 | island2013
Hi Bill, Yes it does have a small circuit right behind the plate. There is a 2amp fuse in there along with some other circuitry. Perhaps your fuse went out
Electronics Forum | Thu Aug 27 12:34:05 EDT 2009 | dpeebles
We have an inline MPM 25 HiE with 2D inspection. We are needing to put in a 2nd line. We have ordered another identical used stencil printer but are wondering if we should upgrade to a newer machine with 3D inspection, automated paste, etc. Will
Electronics Forum | Thu Oct 15 21:29:42 EDT 1998 | Scott McKee
| I need to install some new lines for high mix low volume products in an already cramp building. Could someone share any info about the machines which give you the best bang for floor space. I need a 2 machine system for placing 0402 to fine pitch,
Electronics Forum | Wed Mar 30 15:15:03 EST 2005 | chunks
This is a pet peeve of mine. The paste height requirement is generally asked because the customer has no clue about screen printing, but knows to ask this question. If he did know even a little about printing, he�d ask you to assure the �volume� of
Electronics Forum | Tue Feb 21 17:08:16 EST 2012 | cellis
We finally can't avoid adding wave solder to our > process anymore. For lead-free, medium sized wave > I'm leaning towards mid 2000s senju units as the > best fit. I've never run their equipment. > Opinions? > > As a point of reference for our
Electronics Forum | Mon Aug 07 18:20:40 EDT 2000 | Darby
James, I only use the clamshells for fine pitch if my other printers are non operational. Not reccommended but achievable in an emergency. In answer to your questions. We use two clam shell printers and two vertical lift printers. All are used for 8
Electronics Forum | Fri Oct 16 00:23:16 EDT 1998 | Jim McCarten
I do not think that the Mydata can pick from wafer or has the accuracy required (12 micron)! Am I missing something? | | I need to install some new lines for high mix low volume products in an already cramp building. Could someone share any info a
Electronics Forum | Fri Oct 16 21:33:51 EDT 1998 | Scott
| I do not think that the Mydata can pick from wafer or has the accuracy required (12 micron)! Am I missing something? I don't have personnal experience with flip chip but the next time you're at Nepcon ask Mydata to show you their demo board with
Electronics Forum | Fri Mar 07 14:09:16 EST 2003 | davef
Q1: What are the recommended stencil apertures for a TSOP40. Lead pitch 0.48mm & lead width 0.21mm. A1: We've talked about this previously here on SMTnet, for instance check the fine SMTnet Archives: http://www.smtnet.com//forums/index.cfm?fuseactio
Electronics Forum | Wed Jul 20 12:48:50 EDT 2005 | danhui888
Dear All, I'm looking for the complete SMT > equiment line (solder printer, P&P, Reflow) uses > for the small volume production line. I happen to > know that Manncorp and APSGold can provide the > complete ST line, but I haven't hear and use > t
winsouce.jpg)
