Electronics Forum: mpm squeegee (Page 1 of 11)

Rheopump vs. squeegee

Electronics Forum | Wed Jun 13 12:08:22 EDT 2001 | vance

What kind of quality improvements could be expected by implementing MPM's Rheopump instead of using squeegee blades on a stencil printer?

Rheopump vs. squeegee

Electronics Forum | Thu Jun 14 16:33:32 EDT 2001 | pr

I have found all the advantages (that others have spoken about) are true. One thing to look at is the quick disconnect system that MPM offers which will reduce changeover times to almost the same as blades. It's well designed and so far, for us, has

Re: squeegee angle

Electronics Forum | Tue Apr 06 10:30:48 EDT 1999 | Scott Davies

Tony Although I agree in principle with Dean that 45 Degrees would be ideal, most of the squeegees I have worked with have been 60 Degrees to the stencil surface. This seems to work best with metal squeegees when printing HASL boards, because the sl

Rheopump vs. squeegee

Electronics Forum | Fri Jun 29 13:54:43 EDT 2001 | Brian W.

I have had some conversations with MPM about the Rheo pump. They have some data to support the change from an ROI standpoint. One of their customers has seen a dramatic decline in the amount of wasted paste, resulting in a very large cost savings.

Re: squeegee angle

Electronics Forum | Wed Apr 07 11:42:16 EDT 1999 | Tony A

| Tony | | Although I agree in principle with Dean that 45 Degrees would be ideal, most of the squeegees I have worked with have been 60 Degrees to the stencil surface. This seems to work best with metal squeegees when printing HASL boards, because

Rheopump vs. squeegee

Electronics Forum | Wed Jun 13 21:25:48 EDT 2001 | dougk

We've tried the MPM rheo., with excellent results. We saw a decrease in fine-pitch pad coverage rejects from ~20% to bacicially ~0%. Print speeds went from 1-2 in/sec (metal blade) to 4-5 in/sec (rheo.). Could probably go faster. Great throughput. Li

DEK 265GSX squeegee travel distance

Electronics Forum | Thu Jun 16 20:29:12 EDT 2011 | dman97

Does anyone know if it is possible to change the distance that the squeegees travel? What i mean is... Is it possible to change where the squeegees start and stop during a print? Our squegees seem to stop right at the edge of the apertures and this

MPM up2000 Replacement Squeegee

Electronics Forum | Sat Aug 20 15:18:40 EDT 2016 | mahendra

email mskisten@gmail.com for your squeegee Requirements. Thank you, Mahendra.

Squeegee Blades

Electronics Forum | Fri Feb 18 09:35:10 EST 2000 | JohnW

Ok folk's so it's staw poll time...How are you storing you squeegee baldes? I've been asked / told / commanded to look at how we're storing our DEK and MPM Squeegee blades and improve it. Currently they are held in a cabinate matrix with the blades p

Squeegee Blades

Electronics Forum | Fri Feb 18 09:35:10 EST 2000 | JohnW

Ok folk's so it's staw poll time...How are you storing you squeegee baldes? I've been asked / told / commanded to look at how we're storing our DEK and MPM Squeegee blades and improve it. Currently they are held in a cabinate matrix with the blades p

  1 2 3 4 5 6 7 8 9 10 Next

mpm squeegee searches for Companies, Equipment, Machines, Suppliers & Information

Selective Soldering Nozzles

High Throughput Reflow Oven
Gordon Brothers October 2-30, 2024 Auction

Best Reflow Oven
Encapsulation Dispensing, Dam and Fill, Glob Top, CSOB

We offer SMT Nozzles, feeders and spare parts globally. Find out more
Fluid Dispensing, Staking, TIM, Solder Paste

Smt Feeder repair service centers in Europe, North, South America


"Find out how you can receive priority in SMTnet Search with out Sponsor membership."