Electronics Forum | Mon Mar 26 18:23:47 EDT 2012 | frcdave
Hello Sergio, I can provide you expert perspective on the VT-RNS-PT from Omron as well as on the YESTech platforms. The VT-RNS-PT product is super complicated and difficult to understand from a programming and operation standpoint and really does no
Electronics Forum | Tue Feb 11 13:22:22 EST 2020 | rgduval
Sebas, I suspect that your finding of needing the fillet for the card to work is a false finding. One that I dealt with for many years in assembly. As a bottom terminated device, a fillet to the side terminals of the device is not required. Adequ
Electronics Forum | Thu Mar 02 13:17:00 EST 2000 | Russ
Jack, a couple of questions first, 1. What pitch are these leads? 2. What are the lead footprint dimensions? 3. Orientation of component? I personally have never had much luck soldering QFPs in the wave unless they are 50 mil pitch or greater, we o
Electronics Forum | Wed Mar 01 09:34:13 EST 2000 | Sorin
HELLO, Do anybody know if is existing an empirical rule that can show me how many amps can carry a plated through hole with a diameter of x.xx millimeters? Is there a formula depending on X.XX value that could help me to make such calculations? How
Electronics Forum | Fri Feb 25 11:13:32 EST 2000 | Russ
This probably won't help much but I find it at least a little interesting. During some experimentation recently I accidently loaded a board into the wave upside down and it had a PLCC 68 package along with other types of components that had only bee
Electronics Forum | Fri Feb 25 04:28:49 EST 2000 | Sze-Pei LIM
We faced terrible void issue while using Sn96.5Ag3.5 solder paste, more than 20% void. We tried adjusting the reflow oven profiles but we did not have much success in reducing the void. Generally, we find quick preheat, high peak temp. and fast cooli
Electronics Forum | Wed Feb 23 15:24:24 EST 2000 | Michael Uganecz
Steve, Give MPM/Speedline a call and see if they still sell the SPM-AV, it's a shuttle style printer with vision alignment. It has a really nice auto-align vision system that will move the table in x,y and theta. It's not a look up/look down syste
Electronics Forum | Mon Feb 14 08:41:36 EST 2000 | Graham Naisbitt
Chris, With thanks to Eyal, this is Graham Naisbitt (NiceBit? - Talk to Eyal later!) We can indeed offer you semi-automatic equipment from around $8K US. Your budget is really low, we have to make a living too you know. However, this equipment do
Electronics Forum | Wed Feb 09 21:53:09 EST 2000 | Dave F
Jeff: Two things come to mind (if that's not stretching things too much ...): 1 You've got something unsolderable and not removeable with fluxes is on your component leads (or you don't have enough stomp in your flux). Do the leads that don't sold
Electronics Forum | Wed Jan 10 14:15:48 EST 2001 | Claude_Couture
We have an old Conceptronic oven (Discovery Mark IV) which we use in the glue process. The video monitor just died. This is a 11 year old oven with a Goldstar model 1420 PLUS monitor. There are no specs in the manual and Conceptronic is not much help