Electronics Forum | Tue Mar 16 11:39:13 EDT 2010 | markslade
I have a mirtec MV-3L, does any one know, when drawing a component part with varios side angle camera views can i group that part and its camera views to save in the library and if so how?
Electronics Forum | Tue Jun 30 09:58:35 EDT 2015 | sfeinsp
I have same problem on one of my MV-3L machines
Electronics Forum | Tue Jun 30 10:04:44 EDT 2015 | robie69
In the process of troubleshooting I swapped the video cables around and saw the issue resolve itself. I'm guessing it was loose connections. the fact that these cameras all take the same inputs make troubleshooting simple, swap the cable and see if t
Electronics Forum | Wed Jun 24 08:20:39 EDT 2015 | bdamico
Hello Erik, Please contact MIRTEC for direct support. We will do our very best to help diagnose and resolve this issue. Our main office number is 203-881-5559. Please ask for Technical Support. Thank you, Brian D'Amico President
Electronics Forum | Tue Jun 23 10:39:53 EDT 2015 | robie69
I've read through an old Mirtec thread and in it a couple of guys mentioned that they have issues with their side view camera(s). I'm currently having issues with both of mine, where the image will become blurry, and it will add purple lines to the
Electronics Forum | Mon Mar 29 10:20:29 EDT 2010 | CL
Good Morning Mark, I do not believe that you can group images from multiple cameras. You can save a camera image into the library but you would need to re-name the part number for the side camera if you have an image from the downward looking camera
Electronics Forum | Tue Mar 30 05:03:56 EDT 2010 | markslade
Thanks for your help. mark.
Electronics Forum | Fri Apr 02 04:02:18 EDT 2010 | manju2cool
Hi, I think concept of inspection through AOI is changing. I am struck in confusion.Because some manufacturer say 3D inspection, with 1+4 cameras is ultimate solution. Orbotech also came with 13 cameras at once!Now some say, all these are eyewashing
Electronics Forum | Fri Apr 02 14:11:21 EDT 2010 | bigdaddysoy9
Manjunath, I prefer orthogonal systems. In my experience they are actually better at detecting coplanarity and HIP defects than multi camera systems. They are obviously limited, in that they can not inspect a component under another component, b
Electronics Forum | Fri Apr 02 10:26:13 EDT 2010 | fishingfool
Manjunath The top camera will be used for probably 90-95% of your inspection needs. However, without side cameras that 5-10% of uninspected parts can be a real pain to manually verify. What you need to figure out is what is your product to inspe
