Electronics Forum | Thu Mar 05 23:04:44 EST 2020 | sarason
My advice for what it is worth. Your description of the problem at first glance suggests a communication problem, now is it the bus, the SMT machine or the PC. The bus could have a short or an open. The PC could have a dud controller card. or so co
Electronics Forum | Mon Mar 30 06:41:22 EDT 2020 | jameshayliie
Convert CAD Data into a Placement Program Contract Manufacturing Handle to have a fast and easy way to convert your CAD data into a placement program. Recently I purchased some PCBs from Greatpcb and Cplfpc for my college project.
Electronics Forum | Wed Apr 28 23:18:09 EDT 2004 | Grant Petty
Hi, Ours are inline, and depending on how you have the conveyers, you might need to use the data sheets to work out placement. If your running the conveyers behind the machine, then most of the machine is in front of the conveyer, so they use more s
Electronics Forum | Wed Mar 25 18:34:34 EDT 2020 | spoiltforchoice
> What about designators? Using gerbers to program > a pnp machine was always a last resort to be done > only after much complaining and begging for > proper CAD data. Back in the day I used UniCAM to > program a mydata. After gett
Electronics Forum | Tue Mar 04 16:50:56 EST 2003 | msivigny
Hello Rohan, this is starting to date nearly 6 years ago but I will remember everything I can, we used a custom interface to input data and everything was stored in a very large database on a specific server only for quality data, I think we used Ora
Electronics Forum | Mon Mar 03 09:27:19 EST 2003 | floydl
With regard to measuring dot diameter on my dispensers, is there an easier way to calculate the Cp and Cpk values? This manual data crunching is for the birds!
Electronics Forum | Tue Jun 10 09:50:36 EDT 2008 | dyoungquist
If you have a high mix of products, I would recommend a MyData machine. Changeover times from one job to the next can be minimal.
Electronics Forum | Wed May 09 12:07:52 EDT 2001 | caldon
My personal favorite is the Siemens F series and the UIC GSM platform. Both Siemens and UIC have awesome resources for csp, flipchip and baredie processing - Siemens= Dan Baldwin from GaTech; UIC = George Westby from UIC labs. My second choice would
Electronics Forum | Wed Jul 19 07:27:09 EDT 2023 | roachindignant
This problem appears whenever I turn on my UP2000 HiE printer and try to perform the initial Reset. Hardware Limit Warning (E00938:10) All sensors on the Input/Output Screen are functioning appropriately and will give expected results when checked
Electronics Forum | Tue May 18 21:43:02 EDT 2010 | ashley
Hello mickd, 1) The EL data & Vision_type is NOT necessary when using MCS30 for IP1 machine. note : your input of the above might have cause confusion during VP, hence the OS error. 2) I would suggest the following... 2a) lower the Lead_check_are
