13 my9 and layout and import results

Electronics Forum: my9 and layout and import (Page 1 of 2)

Step by step instructions: How to import prn file and set-up fiducials on pcb (On a My Data My9 SMT machine)

Electronics Forum | Thu Jan 03 07:44:17 EST 2019 | mermarinc

Thanks, @tech1 for replying and giving information about how to import prn file and set-up fiducials on PCB.

Step by step instructions: How to import prn file and set-up fiducials on pcb (On a My Data My9 SMT machine)

Electronics Forum | Wed Jan 02 10:45:02 EST 2019 | tech1

Exactly how are you exporting it? You need to export it in TPsys format followed by Export PCB only

Step by step instructions: How to import prn file and set-up fiducials on pcb (On a My Data My9 SMT machine)

Electronics Forum | Wed Jan 02 13:03:02 EST 2019 | robertbronx

Hi, Thank for reply it. I'm exporting it exactly like that. But the results are as I explained. Question: Is there another procedure to try?

Step by step instructions: How to import prn file and set-up fiducials on pcb (On a My Data My9 SMT machine)

Electronics Forum | Wed Jan 23 10:59:05 EST 2019 | nathanmcdonough

I used to just copy & paste the data from the web interface to an excel file.

Step by step instructions: How to import prn file and set-up fiducials on pcb (On a My Data My9 SMT machine)

Electronics Forum | Mon Dec 31 11:19:32 EST 2018 | robertbronx

We have in our Co. an used My Data SMT (Version 2.5.4d) machine but we have a problem. After creating the file we import with a flash drive.We load and set the two fiducials and after everything is done we try to EXPORT the PCB file instead of being

Pick and Place vs CAD File

Electronics Forum | Mon Sep 25 08:24:25 EDT 2017 | directx995

At the moment we do it like this: We get .csv or .txt pick and place file and .csv or excel bom file. Then I verify every single placement manualy with BOM and delete placements that are not listed on BOM. (Yes, you are right, I do it for 30 placeme

Process control, SMT inspection and rework

Electronics Forum | Wed Apr 10 10:32:39 EDT 2002 | slthomas

Ask your compadres how you can control a process when it's output has already been completed? If you do second side assembly before you inspect the first side, you can't possibly apply real time corrective action. I know what I'm talking about in t

Foam fluxer maintenance, storage and cleaning

Electronics Forum | Mon Nov 09 09:44:22 EST 2015 | davef

Purpose. This describes setting-up a wave soldering system set-up for a new assembly design or checking a wave solder machine operation with a test board. Applicability. To be used for new design printed circuit assembles and during machine accept

Expected pick and place precision for 0603 LEDs?

Electronics Forum | Wed Nov 13 16:48:19 EST 2013 | spoiltforchoice

I would expect any half decent machine to place 0603 parts slap bang on target to the typical defined accuracy for such parts on most machines of perhaps ~60 microns or better. Self correction during reflow is IMHO much less pronounced with lead-free

Registration to be Optional, To Earl, Steve, Scott, Bob, Brian, and All

Electronics Forum | Mon Apr 19 16:09:37 EDT 1999 | Cunli Jia

Dear Earl, Steve, Scott, Bob, Brian, and All, We want to thank you for starting or participating in the dialog and for your continued input, both technical and site related. Our vision at SMTnet is to create the most effective �One Click� communica