Electronics Forum | Mon Mar 07 09:44:49 EST 2005 | anonomous
The machine sees a magazine, but with wrong number. somehow one (maybe more) wire from the magazine bus does not reach slot 3, as the other slots work, there is probably not a short, as the magazine bus work for other slots, the problem is probably i
Electronics Forum | Sun Mar 06 11:04:19 EST 2005 | jsk
Slot three will not recognize magazine. LED's are lit (green)when inserted into slot three. Magazine works in all other slots. Tried multiple magazines. All gave the same error. Error code = E-MIPR-1 unknown magazine type slot 3 No visible damage t
Electronics Forum | Tue May 31 16:52:57 EDT 2011 | xray
Hi SSager, Check out the FA Inspector. It provides 1 Automatic Detection Mode and 2 Manual Inspection Modes. Its used to automate First Article Inspection Tasks and enhance today's principally manual process using microscopes and pen and paper. T
Electronics Forum | Wed Feb 22 20:11:59 EST 2006 | slthomas
*Qualify* your equipment by running X boards, Y times, through each piece of equipment under normal operating conditions and quantifying the performance, as in a ppm rating. Then validate your process by defining all of the steps you use to generate
Electronics Forum | Thu Feb 23 10:49:38 EST 2006 | slthomas
Defining failure modes will help determine what you need to quantify in all processes. Personally I wouldn't pursue the DoE angle (varying setup parameters to determine robustness). 1)How about % pad coverage, paste thickness, and accuracy? Define w
Electronics Forum | Wed May 25 17:56:24 EDT 2011 | rssimmons
The SimmScope is an first article inspection system that uses an overhead digital microsope on a motorized gantry to inspect the board - much like an AOI - except that it does not automatically make the pass/fail decisions. It is up to the operator t
Electronics Forum | Wed Dec 15 16:17:30 EST 2010 | rgduval
Sounds like there may be a people problem somewhere in your process. We have a couple of checks set up to aid with capturing first article issues. First, of course, the kit is checked against the BOM to ensure that all of the parts match. Then, we
Electronics Forum | Sat Oct 21 15:17:34 EDT 2023 | buzzer25
I am in the process of breaking a mydata My9 pick and place machine. All parts are available for purchase if anyone needs anything from a good working machine please message me.
Electronics Forum | Thu Jan 20 15:42:14 EST 2005 | Joel Lohr-Dataforth
We made huge leap from a Zevatech to a My9 three years ago and have been very happy. The MY9 beat out Siemans and Philips for the honor. I am always looking for used MY9 and would buy one without hesitation having gotten over the learning curve. We
Electronics Forum | Sat Dec 02 09:35:25 EST 2023 | buzzer25
Hi, it isn't the whole machine, I am selling spare parts from it. I have taken most parts off and the chassis has now been scrapped.
.png)