Electronics Forum: nickel plate (Page 1 of 31)

nickel corrosion

Electronics Forum | Thu Jul 15 11:17:03 EDT 2010 | davef

Things don't disappear completely. If something caused nickel corrosion, the nickel corrosion by-product would be in place of the nickel. Is it possible that ... There never was any nickel? We know that the nickel will diffuse into the copper. Th

Soldering with Electroless nickel

Electronics Forum | Tue Nov 29 21:51:37 EST 2005 | wmeyers

I have a pin and sleeve assembly that utilizes a fusible link type of solder, Bi, Cd, Pb and Sn alloy. The pin is gold plated, the sleeve is copper alloy 725. I have had sporadic success with wetting of the sleeve during the reflow process. To improv

Soldering nickel strip

Electronics Forum | Mon Apr 28 09:59:04 EDT 2003 | davef

Your customer's question is reasonable. Soldering to nickel is not always a walk on the beach [can of corn, or whatever]. This issue is flux not solder. Your Sn63 will have plenty of strength, providing the solder connection is well formed. You s

solder pad with nickel plating

Electronics Forum | Wed May 11 13:27:30 EDT 2005 | Sam Ho

i want to know which type of solder paste and reflow profile can support the solder pad with nickel but not covered gold on the pcb.

solder pad with nickel plating

Electronics Forum | Wed May 11 13:50:30 EDT 2005 | russ

I would contact your paste supplier, bare nickel can be impossible to wet to. How oxidized is it?

solder pad with nickel plating

Electronics Forum | Thu May 12 07:54:37 EDT 2005 | Rob

We talked about something similar here: http://www.smtnet.com//forums/index.cfm?fuseaction=view_thread&CFApp=1&Thread_ID=8051&#Message31805

Soldering to a nickel plated battery terminal

Electronics Forum | Mon Apr 21 16:38:45 EDT 2014 | barryg

Hello all. We have been having some problems soldering to what we believe is a nickel plated spring steel battery terminal to a PCB. We have tried scrapping , then tinning, dipping and still have problems. Are there any special fluxes or pre-treats t

Soldering to a nickel plated battery terminal

Electronics Forum | Tue Apr 22 12:33:35 EDT 2014 | barryg

No we have a battery spring that is soldered directly to a PCB (standard tin plated copper PCB). The Battery spring supplier (and I have no confirmation he makes them or buys them) claims they are tin plated. When trying to solder to them it is very

Soldering to a nickel plated battery terminal

Electronics Forum | Fri Apr 25 14:49:34 EDT 2014 | isd_jwendell

If the tab is Sn plated, you can solder to it as long as your iron has enough power (watts). If you continue to have trouble then it probably isn't Sn plated.

Solderability issues due to excessive nickel

Electronics Forum | Thu Oct 30 21:55:13 EDT 2014 | davef

Why soldering issues? I'd guess the nickel is corroded. It is very difficult to solder to oxidized nickel. Your SAC305 would get kicked all the way down the conveyor by nickel oxide. A lack of Ni-Sn-IMC formation will confirm this dewetting . What's

  1 2 3 4 5 6 7 8 9 10 Next

nickel plate searches for Companies, Equipment, Machines, Suppliers & Information