Electronics Forum: nipple (Page 1 of 1)

Requesting recommendations for spray guns for pressurized solvents (IPA, Acetone, Chloroform, etc.) that screw onto the head of

Electronics Forum | Mon Apr 11 16:12:15 EDT 2022 | glasscake

MC Master has something similar but you pressurize the chamber with a nipple then have the unit disconnected from air.

Replacement valves for Emerald x / YV88X

Electronics Forum | Thu May 20 22:38:01 EDT 2021 | kumarb

For closure to all readers of this thread...many thanks to Michal for this support. Trans-tec (USA) was great in replying to our countless emails on this topic. We sourced a replacement solenoid # A041E1-48W for our Emerald-X = YV88X. The part was a

Juki Operator Maintenance

Electronics Forum | Tue Sep 10 14:27:12 EDT 2013 | ericrr

There is 8 nipples on the X-Y frame that is used to grease the frame, I was told these need to be greased often, as if the bearings go dry and break down it would cost big money to replace the bearing. (not sure how this price compares to other machi

Love my old Fuji - but it's making some noise now

Electronics Forum | Tue Jul 04 03:15:00 EDT 2006 | dougs

can't you pull the leadscrew cover back? you usually can on fuji machines. pull it back and clean the leadscrew down then smother it with grease and manually run the axis back and forth a couple of times. then repeat until the grease is not discol

Re: Solder paste recovery

Electronics Forum | Wed Dec 20 09:41:52 EST 2000 | blnorman

Ideally we want to mix the same lot numbers in a repackaged tube. Once again, these are partial tubes that have been thrown away. If the ratio is right to begin with the only change would be due to air exposure. Semco makes a TC seal which, if we

Grease & Grease Guns

Electronics Forum | Tue Nov 22 09:38:12 EST 2011 | daxman

Good morning everyone, We're whipping our maintenance into shape. For starters, we've acquired the proper lubricants for our Fuji machines. Most of the lubricants (AFC, LRL-3, Daphne EP2) come in accordion/bellows style grease tubes. This isn't a p

BGA dead bug pick and place

Electronics Forum | Mon Oct 28 09:48:10 EST 2002 | gregp

If I understand correctly you want to pick BGAs from the ball side using some type of vacuum arrangement. You will find that the reliability of this is dependant on the size of the balls and the pitch. The larger the balls and tighter the pitch, th

  1  

nipple searches for Companies, Equipment, Machines, Suppliers & Information

Equipment Auction - Eagle Comtronics: Low-Use Electronic Assembly & Machining Facility 2019 Europlacer iineo + Placement Machine  Test & Inspection: Agilent | Tektronix | Mantis Machine Shop: Haas VF3 | Haas SL-20 | Mult. Lathes

Stencil Printing 101 Training Course
PCB Handling Machine with CE

Software programs for SMT placement and AOI Inspection machines from CAD or Gerber.
2024 Eptac IPC Certification Training Schedule

Training online, at your facility, or at one of our worldwide training centers"