Electronics Forum: not every (Page 1 of 2)

Solder not reflowing properly

Electronics Forum | Mon Aug 25 16:26:52 EDT 2008 | wrongway

every time that i have seen that kind of problem where I work it always seems to be a problem with the parts having comtamination on the leads is it just one part # giving you problems our all 0402 parts on that assy having problems if its just o

GSM1 not performing fiducial PEC?

Electronics Forum | Tue Mar 08 09:57:04 EST 2016 | rgduval

Make sure that your fiducials are selected to be used for global correction. I've had this problem with our machine running OS2, and in the UI for that, you have to select the fiducials in the fid screen, and then there's a menu option to select the

BGA not level when placed

Electronics Forum | Tue Feb 26 05:10:17 EST 2008 | adetuc

Thanks for the reply Hege, I calibrate the machines every 3 months and have checked that the board carrier to nozzle parralelism is ok. Have tried many different profile settings using a MOLE for readings but still collapsing on one corner. I did

ekra e5 blades not dropping.

Electronics Forum | Mon Sep 29 15:28:29 EDT 2014 | dustin

After getting the last issue I had fixed through here. I thought I would try to see if there is a solution for another issue. I have and ekra e5 screen printer and it has a problem with the blades not dropping when they should. If I set up single dir

Quad 4c not placing components

Electronics Forum | Thu Sep 05 07:14:16 EDT 2019 | smrsteve

Hello Bobpan, Thanks for the suggestions. Sorry I didn't reply yesterday as I'd gone home - I'm in the UK, so I'm guessing there's a time difference. Okay, I found the control to turn off the vacuum verify - it's SHIFT - SWITCH/VERIFY. Makes no di

Quad 4c not placing components

Electronics Forum | Wed Sep 04 09:47:41 EDT 2019 | smrsteve

Hello All, I've just bought a Quad 4c pick & place machine. It's so close to actually building boards, but just doesn't quite get there. I was wondering if there's somebody out there with experience of these machines that might be able to help...?

Cover tape not always pulling back on Fuji IP-1

Electronics Forum | Fri Jun 16 10:12:16 EDT 2006 | flipit

It it PSA tape or heat seal? Every machine I have ever used has trouble with PSA cover tape. I wish they would ban in in ROHS. 3M tells me it is the future and it will replace heat seal tape.

Camera not parked error on mpm ap 25.

Electronics Forum | Mon Jun 12 10:38:00 EDT 2017 | highmillr

Getting this error more frequently. Whats causing this?? I have to reset machine every time costing man hours. After resetting its fine but does it at least once a day.

Nordson Dage scan board funtion is not working

Electronics Forum | Tue Sep 26 14:24:49 EDT 2023 | dimamalin

Every year, an engineer from the local service center comes to us and performs the necessary maintenance and calibration.

OS/2 Warp GSM not playing nice with the network

Electronics Forum | Mon May 18 13:37:44 EDT 2009 | thenrz

Hello, Has anyone had luck with getting a GSM 1 machine talking on a windows network? We are looking to do backups every so often. We purchased a 10base-2 to 10base-T converter and it talks to the rj-45 Windows end, but there is no communication

  1 2 Next

not every searches for Companies, Equipment, Machines, Suppliers & Information