Electronics Forum: not initialized (Page 1 of 2)

Mydata feeders not compatible

Electronics Forum | Thu Feb 14 17:00:42 EST 2013 | richardc

I am trying to use Mydata TM8C feeders that work fine on a TP93 running 1.6.18 TPsys but are not recognized by a TP94 machine running 1.4.7 TPsys. I get a green flashing light instead of a solid green. I can initialize the hardware but can not proc

MPM Accuflex Camera not initializing

Electronics Forum | Mon Feb 22 15:44:42 EST 2010 | remullis

Just bought a used machine and everything was working fine and now the camera will not initialize. Powered down completely and rebooted, same thing. I powered down again moved camera to center of axis, it moves to the lower right hand corner which I

MPM Accuflex Camera not initializing

Electronics Forum | Thu Feb 25 14:42:41 EST 2010 | vms

Hello would you want to sell it? Harry

MPM Accuflex Camera not initializing

Electronics Forum | Thu Feb 25 06:59:04 EST 2010 | ristikas

Probably the ribbon cable are broken. I had same issue some time ago. Cable connected to camera and placed under cover. Spare part code is 1007867.

MPM Accuflex Camera not initializing

Electronics Forum | Tue Mar 02 03:41:13 EST 2010 | ristikas

Unfortunately i am not a seller. I am ordering the part from sincotron.eu I dont know your location but if you are in EU then contact them.

MPM Accuflex Camera not initializing

Electronics Forum | Tue Mar 02 04:30:32 EST 2010 | sigmaprint

Hi. It sounds like you may have the problem under control as you have ordered parts but if it still doesn't work please don't hesitate to contact us at sales@accuspares.com or visit our website http://www.accuspares.com. We should be able to help....

MPM Accuflex Camera not initializing

Electronics Forum | Mon Mar 15 18:03:21 EDT 2010 | smt_guy

hi, check the home sensors if they are working specially on the right side rail of the camera where you had the failure.

Quad 4c not placing components

Electronics Forum | Wed Sep 04 09:47:41 EDT 2019 | smrsteve

Hello All, I've just bought a Quad 4c pick & place machine. It's so close to actually building boards, but just doesn't quite get there. I was wondering if there's somebody out there with experience of these machines that might be able to help...?

DEK INFINITY printer file could not be opened.

Electronics Forum | Thu May 17 08:26:05 EDT 2018 | dekhead

Is camera self-initializing upon power up? Please contact me directly dekhead@att.net

OS/2 Warp GSM not playing nice with the network

Electronics Forum | Mon May 18 17:07:16 EDT 2009 | dilogic

OK - first, look at this page: http://www.jacco2.dds.nl/samba/lanman.html There's a pretty detailed description how to install LanMan client on the OS/2 machine. Some links are broken, but you can find alternate sources on the net. A good site wi

  1 2 Next

not initialized searches for Companies, Equipment, Machines, Suppliers & Information

SMT feeders

Smt Feeder repair service centers in Europe, North, South America
Electronics Equipment Consignment

IPC Certification Training from the comfort of your home or office
Best SMT Reflow Oven

High Throughput Reflow Oven
PCB Handling Machine with CE

Training online, at your facility, or at one of our worldwide training centers"