Electronics Forum: nozzl (Page 1 of 229)

Pick and Place drops nozzles

Electronics Forum | Tue Jul 05 09:25:25 EDT 2005 | smtuser1234

If the nozzle adapter is new then the nozzle are worn. How old are the nozzles ?

nozzle - terminology

Electronics Forum | Fri Dec 10 12:25:53 EST 1999 | Marlies Hanf

Hi. Placement machines use nozzles to pick up the components. I found the terms "suction nozzle", "vacuum nozzle" or simply "nozzle". Do the terms all mean the same or is there a difference? Are there also nozzles that don't work with vacuum?

CP6 pickup errors

Electronics Forum | Fri Feb 25 16:34:53 EST 2005 | jimmyb

In your PDs you must specify a single nozzle size. Meaning don't assume that entering nozzle size max=1.3 and nozzle size min=1.3 forces the machine to use a 1.3. Nozzle size min is not used in the CP6 software (it only uses nozzle size max), there

SMT Feeders

Electronics Forum | Thu Feb 24 21:04:29 EST 2011 | ghosteye2011

Various kinds of high quality SMT nozzles, cutters, filters, etc. for more than 10 years, Assembleon nozzle, NXT nozzle, FUJI nozzle, Hitachi nozzle, JUKI nozzle, KME nozzle, Panasert nozzle, Philips nozzle, Samsung nozzle, Sanyo nozzle, Sony nozzle,

nozzle level (low) out of tolerance (universal HSP)

Electronics Forum | Wed Aug 04 08:37:24 EDT 2010 | keiths487

Just to get the simple stuff out of the way. Make > sure that no one has changed the machine nozzle > data to a different type. Then try actually > changing the nozzle data and putting that type > into the head. If this passes it will at least >

How to stop components moving on nozzle

Electronics Forum | Fri Apr 20 13:25:46 EDT 2018 | emeto

This one should be easy. 1. Check your nozzle - make sure you use the right nozzle and the nozzle tip is not damaged in any way. 2. Vacuum suction going to the nozzle should be measured/checked.

CP6 Nozzle sticking

Electronics Forum | Tue Feb 15 09:23:06 EST 2005 | cyber_wolf

Lube on the nozzle shaft ? I didn't see anything saying to lubricate the nozzle shafts !!??

Homemade Custom Nozzles

Electronics Forum | Mon Aug 04 17:40:26 EDT 2008 | Frank

Do they make custom shaped nozzles or only standard replacement nozzles?

Juki nozzle for xqeapa-00-0000-000000801 led

Electronics Forum | Thu Apr 07 11:24:21 EDT 2022 | rasch

It's work on juki rs-1 ? this is dedicate nozzle or is the reworked standard nozzle ?

Nozzle diameter error

Electronics Forum | Mon Jan 16 19:24:54 EST 2023 | linux

don't have nozzle data for this nozzle. checked with panasonic no data available

  1 2 3 4 5 6 7 8 9 10 Next

nozzl searches for Companies, Equipment, Machines, Suppliers & Information

Conductive Adhesive & Non-Conductive Adhesive Dispensing

Easily dispense fine pitch components with ±25µm positioning accuracy.
Pillarhouse USA for handload Selective Soldering Needs

Have you found a solution to REDUCE DISPENSE REWORK? Your answer is here.
thru hole soldering and selective soldering needs

Software programs for SMT placement and AOI Inspection machines from CAD or Gerber.
Dual Lane Reflow Oven

World's Best Reflow Oven Customizable for Unique Applications
PCB Depanelizers

"Find out how you can receive priority in SMTnet Search with out Sponsor membership."