Electronics Forum | Wed Nov 16 06:02:23 EST 2005 | stefwitt
Are feeders included? Otherwise, the MS 102/132 sell even for lower prices here in US. Add shipping and training and you get to the same result. Juki, Contact and Quad may fall in the same price range, but spare parts and service tech availability wi
Electronics Forum | Thu Nov 24 01:45:44 EST 2005 | pavel_murtishev
Good morning, My advice is to put two Topaz-Xii in line. Machine programming is rather easy (with PPS and GPP that AssemleOn offers), but final teaching on machine is strongly required. If you want to prepare programs fully offline you�ll have to pu
Electronics Forum | Thu Mar 30 12:38:14 EST 2006 | Tech
Also why I am at it. In the book CP-6 Series Maintenance Manul ( Fuji Part # MNT-C060-11.3E ) in Chapter 4 page 4-1-11 it says " The clutches should therfore be cleaned regularly, using the grease cleaner (ThreeBond 2706) provided with the machine."
Electronics Forum | Fri Mar 31 10:22:59 EST 2006 | Tech
It could be related but it is kinda hard to tell from just this info. A lot of times if a clutch gets misaligned so bad that the machine has no idea where it is the machine will stop and turn the clutch several times trying to find its home point. It
Electronics Forum | Mon Apr 17 22:52:02 EDT 2006 | daxman
Okay, we got the machine back together about 2 weeks ago, cleaned the clutches and measured the placement accuracy. We are back up 100%, and have not seen any stn 17 & stn 19 nozzle errors. Thanks guys!! 19 of the 20 clutches are really tight; they
Electronics Forum | Wed Feb 01 10:01:09 EST 2006 | electromek
I was wondering if anyone else is finding cost and delivery time for Soltec parts not acceptable. I would love to get a substitution list going with everyone. I am after a replacement for filter 90006942. We need to replace 3 of these a month and Sol
Electronics Forum | Thu Mar 09 00:45:57 EST 2006 | kent_peterson
Fastek will get it done with 2 machine and 2 shifts. 2 shifts would need to place 50,000cph. One CP643 with both device tables set could get it done. Having it panelized in 50's, you would need to print 50 panels a hour so get a auto cleaner on the p
Electronics Forum | Sat May 13 00:17:40 EDT 2006 | George S
I had Mydata for several years, and got a Juki 2060R about 8 months ago. If I had to choose today, it would be Juki again. The features which help me are bank changing, where I can set up offline and change over in two minutes for all feeders. The
Electronics Forum | Fri May 05 09:52:52 EDT 2006 | Rob
I think perhaps you should revisit the choice and take another look at Universal Advantis, I-Pulse M2 & M4(low cost Assemblion), Samsung SM320 or CP45 Neo, Contact Systems C5, Fuji XP series, Juki KE2060, and Siemens Siplace. There is nothing wrong
Electronics Forum | Fri Feb 16 11:07:25 EST 2007 | stepheniii
I'm not sure if anyone mentioned the single most important factor. p.m.'s. If the nozzles are getting dirty and clogged it's not going to do a great job of picking parts up. Don't think in terms of variation. It's there it's unavoidable and undet
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
2481 Hilton Drive
Gainesville, GA USA
Phone: (770) 538-0411