Electronics Forum | Thu Nov 17 05:11:09 EST 2011 | bobpan
wow.....lets try some more things....... first....i think quad align error 0 has something to do with the theta number not being at 0,6000,12000,18000. I am not for sure about that but check it out by doing a function 3 on your pickups. second.....
Electronics Forum | Mon Nov 21 10:56:32 EST 2011 | gosswald
I have been able to get the machine to run by using the teach feature in Central Controller. The fiducials coordinates are there from Auto Program even though they won’t run. Another problem I have with this is the board fails the visual inspection i
Electronics Forum | Tue Nov 22 09:38:12 EST 2011 | daxman
Good morning everyone, We're whipping our maintenance into shape. For starters, we've acquired the proper lubricants for our Fuji machines. Most of the lubricants (AFC, LRL-3, Daphne EP2) come in accordion/bellows style grease tubes. This isn't a p
Electronics Forum | Tue Jan 03 13:44:18 EST 2012 | daxman
Hi comando, If you change a camera, there are quite a lot of calibrations you need to carry out. Firstly: Did you remove the camera from the mounting bracket? If so, you'll need a special jig to mount it back on the bracket properly. You can still d
Electronics Forum | Tue Mar 06 17:22:42 EST 2012 | acsscott
OK, did some more testing this afternoon. First, I moved the LED’s from feeder location #23 to Feeder location 30. This is three down from the other component(#33) it is picking, so it should be able to hit them both at the same time for two of the
Electronics Forum | Tue Mar 06 17:24:31 EST 2012 | acsscott
OK, did some more testing this afternoon. First, I moved the LED’s from feeder location #23 to Feeder location 30. This is three down from the other component(#33) it is picking, so it should be able to hit them both at the same time for two of the
Electronics Forum | Thu Jun 21 16:30:47 EDT 2012 | grauen06
We are currently using an ACE K.I.S.S. 104. We used SN100 solder with AIM NC265 flux (no clean, alcohol-based). Also, we use topside preheat at 100 degrees C and a 6mm nozzle (as big as we can go with this application). The PCB has a matte finish as
Electronics Forum | Fri Jun 22 21:07:08 EDT 2012 | tank1266
I have had Selective issues such as yours on two very different Selective Solder Machines. I was able to eliminate these issues by using Alpha EF-9301 wave flux with any SAC305 solder. It's a more aggressive flux, but really made the difference. Anot
Electronics Forum | Fri Feb 01 19:12:18 EST 2013 | marcelorotofrance
Hi, I have a QUAD 4C mk2. I taught pickups and places from HHT. If I test them individually (RUN STEP PICK/PLACE etc...) before building the sequence, everything runs ok. After the sequence was built, everything goes wrong. Every PICK or PLACE ends i
Electronics Forum | Wed Feb 06 06:32:06 EST 2013 | bandjwet
We have been running both SRT and APR rework systems for many years in our business as a service provider of BGA rework (http://www.solder.net/services/bga-rework-services The SRT is a true workhorse with good bottom side heating capabilities. If yo
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
2481 Hilton Drive
Gainesville, GA USA
Phone: (770) 538-0411