Electronics Forum: nozzle and vacuum (Page 1 of 39)

Timeout waiting for nozzle changer vacuum buildup.

Electronics Forum | Tue Sep 05 14:40:08 EDT 2017 | rgduval

We emailed off forum about this...and I'm wondering how things are progressing. As I noted in email, our issue was the nozzle change was resulting in too many nozzles being out of the same vacuum channel on the tool box. I can't remember how it was

Timeout waiting for nozzle changer vacuum buildup.

Electronics Forum | Tue Sep 05 11:09:09 EDT 2017 | emeto

The message might still be correct. Change the pneumatic cylinder on the nozzle changer - I have seen these to go bad.

Timeout waiting for nozzle changer vacuum buildup.

Electronics Forum | Fri Sep 01 09:54:02 EDT 2017 | gsmx4321

I get a Timeout waiting for nozzle changer vacuum buildup failure every time I go to run my 1998 GSMx machine. The problems seems to be that once in a while (it seems to be random) the spindle does not line up exactly in the center of the nozzle cha

Timeout waiting for nozzle changer vacuum buildup.

Electronics Forum | Fri Sep 08 22:37:30 EDT 2017 | ttheis

If you have two changers and only one head, make sure there is only one open port (one changer should be filled up and the other should have one open hole.) The head should be full of nozzles as well. As you mentioned go into the diagnostics and act

Timeout waiting for nozzle changer vacuum buildup.

Electronics Forum | Tue Sep 05 10:14:41 EDT 2017 | swag

Try a fid teach on your changers. I don't recall how to do it but you'll find it pretty easy if you surf around. Also, the seals on the nozzles must be good and soft. If you can still get them new, I'd replace. Same goes for seals in changers. C

Nozzle gives vacuum error

Electronics Forum | Wed Mar 15 13:38:12 EDT 2023 | emeto

Did you try clean them or place brand new nozzles to see if error goes away?

Nozzle gives vacuum error

Electronics Forum | Sat Mar 11 07:33:52 EST 2023 | klauss

There's two kind of nozzles with different dimensions we use. One of them works good but the another one gives a head problem sometimes. The head picks the nozzle and gives the vacuum error despite the camera recognize it. So i make another head pi

Nozzle gives vacuum error

Electronics Forum | Sun Mar 12 11:10:51 EDT 2023 | compit

I don't know how in Panasonic - in Yamaha and similar pressure / vacuum is calibrated for each head and nozzle - maybe you need to calibrate?

Nozzle gives vacuum error

Electronics Forum | Wed Mar 15 14:18:24 EDT 2023 | klauss

first, brand new nozzles work good but after a while they also give an error. but later they're not working again. it's like a cycle

Nozzle gives vacuum error

Electronics Forum | Mon Mar 13 01:53:25 EDT 2023 | sophyluo1985

Dear Klauss,Maybe you can ask our GOLDLAND company, we are very familiar with the AM100 machine, you can send a message to our engineering team and describe your problem. They'll be happy to sort it out for you. I'll introduce you to our engineering

  1 2 3 4 5 6 7 8 9 10 Next

nozzle and vacuum searches for Companies, Equipment, Machines, Suppliers & Information

Best SMT Reflow Oven

World's Best Reflow Oven Customizable for Unique Applications
ISVI High Resolution Fast Speed Industrial Cameras

Benchtop Fluid Dispenser
Hot selling SMT spare parts and professional SMT machine solutions

Thermal Transfer Materials.