Electronics Forum: nuts (Page 1 of 16)

LED rejection driving me nuts

Electronics Forum | Thu Apr 11 09:21:57 EDT 2013 | ericrr

Hi All, sorry to bug you, the attached picture of a LED is driving me nuts,

LED rejection driving me nuts

Electronics Forum | Thu Apr 11 15:09:20 EDT 2013 | ericrr

Thank you for that Phil, we have more LED coming.

LED rejection driving me nuts

Electronics Forum | Mon Apr 15 13:29:22 EDT 2013 | cyber_wolf

The laser height can be changed to any level you want regardless of the algorithm you select.

LED rejection driving me nuts

Electronics Forum | Thu Apr 11 13:50:26 EDT 2013 | jimmyboz

I don't know Juki machines, but I assume it is using vision. On these components I have sometimes called the leads the body and the body the leads. I'll make a picture if this sounds like it will help.

LED rejection driving me nuts

Electronics Forum | Fri Apr 12 10:27:20 EDT 2013 | dontfeedphils

No problem. I attached a little visual aid that I use to remember the different laser algorithms that the machine uses.

LED rejection driving me nuts

Electronics Forum | Thu Apr 11 11:32:16 EDT 2013 | markhoch

It might help to investigate the error code provided for the rejected parts. It could help point your troubleshooting methods in the right direction. (Example, if it's failing for vision errors, you may need to make adjustments to your vision file di

LED rejection driving me nuts

Electronics Forum | Thu Apr 11 14:11:10 EDT 2013 | dontfeedphils

If it's using the laser alignment try changing the part type to "SOT" instead of chip, and then enter the dimensions for only the body of the component. The "Chip" setting will measure the part half way down the body, the "SOT" setting will measure

Need drawing for MPM Speedline Accuflex Printer

Electronics Forum | Mon Oct 05 13:15:05 EDT 2020 | proceng1

I am trying to replace the anti-backlash nuts for the moveable rail on my ACCUFLEX Printer. I have parts diagrams, but none show the Y-axis width lead screw assembly. I can't figure out how to disassemble the screws to get the nuts out. Does som

Surface Tension vs Part Mass

Electronics Forum | Tue Sep 12 22:03:22 EDT 2006 | davef

Really Rocky? What's the meaning of Russ' "if it will fit" in your scheme? As an alternative to your scheme, he could glue the nut on its side, tie a string through the hole in the nut, attach the other end of the string to the open door, and the

Part drop after reflow

Electronics Forum | Fri Jun 26 14:08:49 EDT 2020 | indhu

Hi, I am having a issue that SMT nut drop after reflow. The solder height all in specifications. Had tried adding flux inand the solder paste. But shows no improvement. Is the nut easily oxidize? Can anyone help me on this?

  1 2 3 4 5 6 7 8 9 10 Next

nuts searches for Companies, Equipment, Machines, Suppliers & Information