Electronics Forum | Thu Nov 20 17:30:55 EST 2014 | gregcr
Hi All, I have a customer with a very dense design (24 layers, 0201's lots of micro-BGA and lead-less), and they run extreme data rates. Every once and a while they will have a unit that has some speed fall off and they attribute that to the possib
Electronics Forum | Thu Dec 18 13:07:50 EST 2014 | kevinb
I have worked with Epoxy Technology in the past with silver epoxy. Just to fill you in on what I have been doing with this project in the past. I was using a silver epoxy for my 0201s. I then over molded with an epoxy with a dam and fill. Then th
Electronics Forum | Thu Feb 12 07:58:54 EST 2015 | erezah
A-610E, 10.7.4 covers solder mask discoloration. > Use that for your disposition > > In a previous > thread, Boardhouse told us "Here are a couple of > things that can affect color. * Material color > is the major, * Matte green from Enthone wou
Electronics Forum | Wed Feb 18 10:42:15 EST 2015 | stevea
The surprise to me with this entire post is why CyberOptics (USA) has never come up in this conversation. The new SQ3000 will change the 3D AOI market for the better with their MRS technology. I have witnessed the image quality from this new sensor
Electronics Forum | Tue Mar 03 16:14:37 EST 2015 | lokit
Hello, No experience with Mirtec, they are more populair in the States and Asia it seems. For my company, not only the inspection depth and reducing false fails was important, but also good costumer support. Keep in mind that if you have problems w
Electronics Forum | Sun Feb 22 15:46:09 EST 2015 | slave2anubis
Hi, my name is Dacian, and i run a mobile phone repair shop in Timisoara, Romania. Lately we decided to do more advance motherboard repair jobs, and a big problem that we have is, cleaning the board after we remove the chips. We repair manly iPhone,
Electronics Forum | Thu Jun 11 05:36:28 EDT 2015 | jlawson
Valor MSS NPI is far more powerful than all the lower cost solutions, I had customer assess all their lower cost solutions and found no real added value, if want more than just SMT programming. NPI needs Stencil Optimisation , DFM analysis, DFT engi
Electronics Forum | Wed Jun 17 14:34:22 EDT 2015 | rgduval
Thanks for the shot at it :) So, I discovered the "feeder teach" feature that UIC has in the software. It's fantastic...except it doesn't give the option to have the PTF deliver a part to the belt. That was mildly disappointing. In the help files
Electronics Forum | Wed Jun 17 17:06:29 EDT 2015 | swag
Awesome! It's good you found feeder teach. One warning: feeder teach is not slot specific (at least not when I ran GSM). Example: You teach an 8mm feeder in slot 30. You then teach an 8mm feeder in slot 31. The pick will change for the slot 30
Electronics Forum | Thu Jul 30 16:38:40 EDT 2015 | lokit
There are several big competitors out in the field. Since a few years 3D AOI is getting more and more populair. The reliability is much higher compared to comparing grey scales (pixels) with one another. Measuring the height, length and width of a co
