Electronics Forum: ohm and motor (Page 1 of 4)

Quad IVc Main Breaker

Electronics Forum | Tue May 07 15:30:41 EDT 2013 | bobpan

your card is probably bad.....you can ohm out the motor and cable if you want... z motor windings 1.36 ohms z motor cable and windings 1.82 ohms good luck

Transmitter and Recievers

Electronics Forum | Thu Oct 21 16:08:16 EDT 2004 | Dzyna Kid

Does anyone know of any resources I could investigate to make a small circuit that would consist of a transmitter, receiver, and a motor. I want to be able to press a button on a remote control and that would make the motor turn on, then I want to b

ESD Smocks and chairs

Electronics Forum | Wed Jun 06 09:28:35 EDT 2007 | larryp

Thanks for the help but I do have another question. First I guess that just the touching of the smock to the skin is anough to give the charge on the person a path to the smock. OK I can accept that if button up at the breast and sleeves. Now I kno

ESD Smocks and chairs

Electronics Forum | Tue Jun 19 21:44:20 EDT 2007 | rfrog

The first thing that I would do is contact the smock manufacturer and ask them for advice on testing the smocks. ESD FROM A TO Z 2nd ed. (Kolyer) states that: smocks should have a resistivity of less than 10^12/sq and must not shed steel fibers.

Transmitter and Recievers

Electronics Forum | Fri Aug 05 14:42:06 EDT 2005 | B R Proctor

hi their In south africa, we manufacture recievers that work with a remote. They can be used in a simple circuit to control a motor. Best regards Barry Proctor e-mail :zaza@wol.co.za

PFMEA and SPC/Cpk program

Electronics Forum | Thu Mar 02 15:42:30 EST 2006 | russ

in addition to Amols comments I also like Minitab. For FMEA Ford motor Company has a great FMEA program

Tp9 and Tp9 ufp

Electronics Forum | Tue Oct 25 15:03:48 EDT 2011 | sjs2303

Hi Bert, For your second issue, are the tools well lubricated? If not the Midas head can fail to grab the tool and can generate the z motor error. Doing this followed by a base-centre level measurement should resolve your problem. Steve

Pick and Place tutorials

Electronics Forum | Wed Oct 01 10:20:48 EDT 2003 | caldon

www.smtmag.com has Step-by-step articles written by OEMS...Just type in Step-by-step into the search engine on the website...sit back and enjoy the links. Also, http://www.smtinfocus.com has a brief snip-it as well. You may want to do a search for

Tp9 and Tp9 ufp

Electronics Forum | Mon Oct 24 16:24:53 EDT 2011 | smdbert

Hello, My name is Bert i'm working by LéTÉ with two mydata smd machines and have sometimes several problems ,most of the problems try to solve it by myself but sometimes the boss also helps and i write the errors in map but first of all 4 questions

Tp9 and Tp9 ufp

Electronics Forum | Wed Oct 26 11:02:41 EDT 2011 | dyoungquist

TP9 machines are good, but old machines. We ran a TP9 for many years. As the machine got older it required more and more maintenance and had more frequent small issues similar to what you are seeing. We only saw 1 of your 4 issues specifically whi

  1 2 3 4 Next

ohm and motor searches for Companies, Equipment, Machines, Suppliers & Information

Used SMT Machines

SMT Placement Machines - See new arrivals.
Reflow Oven

High Resolution Fast Speed Industrial Cameras.
zestron pcb cleaning webinars

PCB Assembly Supplies - ONLINE STORE
Industry 4.0 Reflow Oven

Benchtop Fluid Dispenser