Electronics Forum: omega-meter and password (Page 1 of 2)

GSM2 Universal user name and password

Electronics Forum | Sat Oct 06 17:39:58 EDT 2012 | sonavc

I got GSM2 Universal at auction. the machine boot O.K. it asked to put user name and password to run the software. please any ideal to remove it or reinstall the software. ( I have NO Manual or software ) thanks

GSM2 Universal user name and password

Electronics Forum | Thu Oct 25 19:53:42 EDT 2012 | sonavc

Thank It worked without the user name and password.When I try to zero axis I have other error unable write to global memory 5008. My machine, when turn it on i don't see the power to the Digiplan 8 axis modular and no bright on 24VAC on at servo co

GSM2 Universal user name and password

Electronics Forum | Tue Oct 09 16:01:48 EDT 2012 | dilogic

Try this - boot machine to OS/2 and interrupt USOS startup procedure, go to USOS/CONFIG folder and rename PSWDUSER.CFG to something else, in case you will need it. Then copy the attached file and reboot.

GSM2 Universal user name and password

Electronics Forum | Fri Oct 26 13:43:54 EDT 2012 | whispell

Make sure your machine configuration is correct. You may have something assigned to the machine that is no longer there. For 24V check to make sure all of the E-stop jumpers are plugged in.

Ionic testing and No-Clean flux

Electronics Forum | Fri Feb 04 09:23:21 EST 2000 | Casimir Budzinski

If No-Clean flux does not need to be cleaned, then why do I get readings of up to 27(ug NaCl/sq in) on boards that are not washed, up to 23.4(ug NaCl/sq in) on boards washed with DI water only and from 1.2 to 10.1(ug NaCl/sq in) on boards washed with

Re: smt terms and definitions

Electronics Forum | Sat Dec 11 10:45:08 EST 1999 | tom terlizzi

tried again to dec 11 and it work the first time I don't have my password this time I did so maybe you have to been in a password mode thanks Tom Terlizzi aeroflex

MPM Up2000 and SMEMA

Electronics Forum | Tue Sep 20 15:00:26 EDT 2016 | awhite

Got it!!!!! On the main Operator Screen for the MPM UP2000, and under configuration (when logged-in under maintenance), it gives you ONLY the settings that the machine is set to....there are no drop-downs or options available to choose from. Very fr

Panasonic MV2C pick and place.

Electronics Forum | Thu May 21 19:49:14 EDT 2020 | gabriel1blue

The machine doesn't have an option for F7 to enter the password. Sorry for that typo.

Panasonic MV2C pick and place.

Electronics Forum | Thu May 21 19:42:51 EDT 2020 | gabriel1blue

My machine does have option F7 to enter the password. I tried to enter the password on different screens but no luck as of now. And not it gave me a deviation counter overflow error? I believe it has to do with the machine data we entered on the mach

Panasonic MV2C pick and place.

Electronics Forum | Wed Feb 24 23:08:03 EST 2021 | gabriel1blue

How are you? Thank you for your time and all you help. I hope you can help me out one more time? The machine got reset again and normally I would just enter the date backwards as a password and everything it's good now the date has ; character in-bet

  1 2 Next

omega-meter and password searches for Companies, Equipment, Machines, Suppliers & Information

Sell Your Used SMT & Test Equipment

Repair tools for all your electronic circuit board repair needs.
IPC Training & Certification - Blackfox

Easily dispense fine pitch components with ±25µm positioning accuracy.


Best Reflow Oven