Electronics Forum | Wed Aug 07 16:55:03 EDT 2013 | hegemon
And to my knowledge, there is no calibration of Thermocouples. They can only be checked for their continuity and resistive value. The question would appear to be invalid.
Electronics Forum | Tue Jun 19 21:44:20 EDT 2007 | rfrog
The first thing that I would do is contact the smock manufacturer and ask them for advice on testing the smocks. ESD FROM A TO Z 2nd ed. (Kolyer) states that: smocks should have a resistivity of less than 10^12/sq and must not shed steel fibers.
Electronics Forum | Tue Mar 31 20:06:44 EDT 2009 | davef
Have you talked to people [Specialty Coating Systems 800-356-8260 317-244-1200 scscoatings.com/parylene_equipment/omegameter.aspx] about repairing your Omegameter? Major differences between the testers are: * Ionograph measures conductivity, while t
Electronics Forum | Fri May 17 05:12:51 EDT 2013 | ultimatejoker
What is the disadvantage of palladium plating instead of gold plating? I saw many advantage of palladium plating in term of hardness, wear resistance, and price but why most of the PCB Industries still use gold in PCB pad? Thank you
Electronics Forum | Tue Nov 09 11:42:37 EST 1999 | Dave F
Jeff: Try this: ROSA. John�s spot on. I�ll add that it is a fluxless method that reduces the oxides in an aqueous solution. Another source of information is: Trench, M., Hillman, D., Lucey, G., "Environmentally Friendly Closed Loop Soldering,"
Electronics Forum | Wed Aug 21 10:26:08 EDT 2002 | stownsend
We are using OSP coated boards and no-clean solder paste. In a few instances, we are seeing increased distortion in an audio circuit. Has anybody seen or heard of surface insulation resistance (SIR) decreasing after reflow on OSP boards? Is it possib
Electronics Forum | Tue Nov 11 17:35:08 EST 2008 | davef
SM-840, is a material qualification document only, with all the test requirements applicable only to a defined test coupon, not to production boards. So, it's useless for what you're trying to accomplish. As assemblers use A-610 - Acceptability Of E
Electronics Forum | Wed Aug 21 17:44:32 EDT 2002 | davef
Splitting hairs, I expect SIR of all solderability protection, including OSP, to decrease after reflow. What�s more, I expect the SIR of all solderability protection to pretty much decrease over time. The �comb pattern� test specimens meet requirem
Electronics Forum | Fri Mar 11 18:30:50 EST 2005 | davef
Russ: In December 2003, the European Commission released the following statement: �The commission services have prepared a draft Commission decision establishing maximum concentration values pursuant to Article5(1)(a) of Directive 2002/95/EC. The pr
Electronics Forum | Thu May 30 10:31:03 EDT 2002 | robbied
Hi Yannick. This is an issue that we are just recently getting into but here is some ifo that I have gathered so far. I have seen/ used 2 different rework machines. The one we have bought is a 'PACE TF2000' which was at the lower cost end of the mar
