Electronics Forum | Tue Dec 05 15:40:05 EST 2006 | jdengler
What year is your machine and what year is your Electric Drawing? My machine is 1989 and so is my drawing. I do not have a SIP-1750 drawing. The IP went through several changes during its production so your machine may not match mine. The CON I/F
Electronics Forum | Thu Dec 07 00:55:51 EST 2006 | billylim
As you are aware the common method to rework BGA is : 1. Remove BGA with hot air reflow machine ( SRT as current practice) 2. Clean the BGA pad using solder iron and solder wick. 3. Replace BGA with SRT rework machine. The problem we have with
Electronics Forum | Thu Dec 07 13:51:59 EST 2006 | ganoi
I need advices as to how a gap between the bottom of an LED (1209-package) and the PCB can be controlled on a small rigid-flex PCBA? The problem that we experience is due to tight tolerance in the design of our molded housing in which this PCBA is as
Electronics Forum | Sun Dec 17 14:49:57 EST 2006 | kvanzill
Well, We have several lines some products run Kester 256 and others run the Timura. I have changed the product to print on another printer and it follows. We have several products that use the same paste and similiar board design that has a problem
Electronics Forum | Mon Dec 18 13:00:34 EST 2006 | realchunks
Hi John, Depending on your board, it could make a difference. Copper finishes might leave that part of the pad exposed, which is a no-no in most places. Where as a HASL board prolly won't care if you pulled the print back. On the other end, over
Electronics Forum | Fri Dec 29 15:02:33 EST 2006 | bman
We build quite a few cables ourselves, and we go through a lot of heat shrink labels. Unfortunately, we only use Brady heat shrink labels, so I don't know if I can help much. Are you actually running raw heat shrink through your printer? If so, go
Electronics Forum | Wed Jan 03 11:00:08 EST 2007 | mIKE f
We use the Brady parts, from the PS-094 up thru the PS-500 size, on a Brady 300MVP printer. We also use that printer for marking Brady polyimide labels. The problem is when we try to print on the smaller markers the printing keeps wandering off the
Electronics Forum | Sun Dec 24 15:30:07 EST 2006 | pima
hello Everybody I would like to ask you for advise. I'm fighting with correct placing one of capacitors in TNT-A package at CP-6 machine. Size of this component is: L=3,4 mm W=1,7 H=1,7 Its Tantalium with J-lead. I use for this component vision type
Electronics Forum | Thu Jan 04 13:22:31 EST 2007 | patrickbruneel
Yes Samir I�m aware of this, but thanks for reminding me. I posted this in Oct 2006 http://www.smtnet.com//forums/index.cfm?fuseaction=view_thread&CFApp=1&Thread_ID=10978&#Message44694 This is not going to affect us much because China is more expor
Electronics Forum | Tue Jan 09 12:51:14 EST 2007 | aj
All, We have ran a few revisions of a New Product which is a tracking device using satellite navigation. The protos went well but now they have added a shielding can. We place 2 of these to cover the Frontend of the PCB. The test guys are having d
