Electronics Forum | Fri Mar 26 06:58:06 EDT 2010 | ristikas
Hello, We have here very oftenly one error in our MPM Accuflex. I dont know who to ask about that errors... The error is „The transfer light peam interlock has been broken. Remove the obstacle from the path of the beam.“ I checked the sensors and
Electronics Forum | Mon Apr 26 14:40:07 EDT 2010 | blnorman
We had one product that used immersion silver plating. There were a couple of instances where we saw tarnishing, and elemental analysis confirmed the presence of sulfur. These boards did have the anti-tarnish sheets between boards, but somehow they
Electronics Forum | Sun May 02 11:44:03 EDT 2010 | davef
J-STD-001 is your base requirement, but MIL and SPACE have stringent requirements for soldering gold plated terminals, e.g. this typical one: http://xweb.nrl.navy.mil/glast/CALDesign/CDE/CAL%20DPD%20Wire%20Cable%20Soldering%20and%20Staking%20Spec%20
Electronics Forum | Tue May 04 09:45:05 EDT 2010 | dyoungquist
Only use the shop air if it is clean and dry. I know from experience that one can get water and a little oil from the compressor in the air lines. We are in a drier climate with humidity levels in the 25%-35% range on average. All we do is let the
Electronics Forum | Fri May 07 01:50:28 EDT 2010 | tonaxel
Hello, I just have a bit problems with one TM8 what is not always able to put the parts in the right pick position. The wheel with the part stops very often before the pick position. Does anybody have a service manual for the TM8? Thank you very muc
Electronics Forum | Mon May 17 12:46:43 EDT 2010 | flipit
Big problem. Certain LED from certain manufacturer sticks to the tape and reel cover tape. Peel back the cover tape and every LED lifts out of the embossed pocket and sticks to the cover tape. I believe this is from static and not any sort of adhe
Electronics Forum | Tue Jun 08 18:25:47 EDT 2010 | smtmax
Hi Danny, Are you doing lead free? If yes, I would consider the AE-R330A or SMT-2010 lead free reflow oven. Our reflow oven is affordable and brand new. Just want to make sure what size is your board. Also, all of our equipment comes with one year s
Electronics Forum | Wed Jun 09 03:29:20 EDT 2010 | whitewing
I've just ordered one of these, which appear to be about the cheapest. Widely used for reflowing BGAs on faulty Playstations apparently. I'll report on how well it works once I get it. http://shop.ebay.com/?_from=R40&_trksid=p3907.m570.l1313&_nkw=
Electronics Forum | Thu Jun 10 20:39:02 EDT 2010 | ada
T962's have a great reputation for cold spots, non-RoHS capable, and catching on fire. however, one can't argue that they are quite inexpensive! The T200's can be had for ~$2k and are apparently not too bad. See this thread for some first hand accou
Electronics Forum | Wed Jun 30 19:31:40 EDT 2010 | jry74
Tim, try and incorporate an inline wash system. We use one with a surfactant and it cleans the "NO CLEAN" fluxes well. If you dont have an inline system, you can manual clean the boards with an surfactant and IPA. You can also do an ionic contamin